|Prev||Professional Automotive Repair Technical Discussions for July 19, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|2000 Ford Taurus SE 4-Valve 3.0L No Start VIN: 1FAFP55S5Y
Gentlemen, Got this lovely Taurus here stressing me out. Help!!! Intermittent no start on every 8th (approx) start. I found that COP power goes away when the no start occurs. There are no codes. CEL is illuminated at key-on, but goes out when cranking even du...
Fixes & Summaries for Ford
|2000 Ford Mustang GT 4.6L Excessive Emissions, Poor Idle Quality, Misfire VIN: 1FAFP45X7Y
Guy's, all great replies and I appreciate the time taken out of your busy lives to help other. At this point with this car I have gone over and tipple checked everything. Ran a running comp and leak down, the engine is healthy. Plug wells and such are dry. O2'...
|2001 Ford F-350 Super Duty Lariat 7.3L Transmission VIN: 1FTSW31F61
Thanks to all that replied, I ended up contacting a transmission hot line help. I did not mention that the scanner was reading 19mph when KOER. I was so focused on the signal from the ABS module that I did not check the scanner reading at the time when unplugg...
|2006 Ford F-250 Super Duty XLT 6.0L No Start VIN: 1FTSW21P96
Thanks for all the help. I didn't know at first you spin engine over and watch FICM voltage, but also I saw it says FICM sync and mine said no. It was the FICM got mine repaired by FICM FIXER in TX. Installed and fired right up! Trouble codes: P0611 (Injector low circuit), P0264 (Injector 2), P0267 (3), P0270 (4), P0273 (5), P0276 (6 all 8).