|Prev||Professional Automotive Repair Technical Discussions for May 28, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1999 Chrysler Concorde LXi 3.2L No Start VIN: 2C3HD46J3X
Thanks in advance for your help. This vehicle had a long crank only after a hot soak for about 10 min. The fuel pressure is at 48 psi running. The fuel pressure drops down to 0 psi within 1 minute after shutting off engine. There are no codes present in the pc...
|2003 Dodge Ram 1500 Laramie 5.7L No Crank, No Comm. VIN: 1D7HA18D13
Vehicle came in with intermittent No Crank complaint. Found that No Crank is accompanied by No Communication with PCM problem. All modules communicate when starting, and only PCM stops communicating when No Crank occurs- all others still talk. Have tested all ... Trouble codes: P1618 (Sensor Reference Volts Erratic), P2106 (Forced Limited Power)
Fixes & Summaries for Chrysler
|2005 Dodge Neon SXT 2.0L No Start, MIL Lamp on VIN: 1B3ES56C55
Thanks for the help guys...most replies told me to check the ground for the fuel sender which I did and found it to be ok. I finally was able to get this thing to act up while someone else was around and then determined while it was a no start, it had no inje... Trouble codes: U110C.