Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for May 27, 2014
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Ford
Help Request Answers
1989 Ford E-150 Econoline Custom 5.8L Excessive Emissions VIN: 1FDEE14HXK
Thank's to all for any help, This van failed smog on nox, replaced the egr valve and the pos. sen.. chk'd for vacuum to egr, "t" into the vac. line to ck. for vac .no vacuum. Try vac solinoid no luck. Any help would be appreciated. Thank's G.T.
View
2001 Ford Mustang SVT Cobra 4.6L All readiness monito VIN: 1FAFP47V51
Car will not pass nys inspection because inspection station can't communicate with pcm. Owner tried several different stations. Cobra runs great, abs light on for codes c1175 lr wheel speed sensor and c1805 pcm/abs mismatch. Flow chart says to replace pcm. If ... Trouble codes: C1805 (Repeats pcm/abs mismatch)
View
2004 Ford F-150 FX4 5.4L Engine VIN: 1FTPX14514
I'm not a Ford tech but I got stuck with this one. 6 weeks ago a tech in our shop replaced timing chains, tensioners, guides, and phasers because of guide breaking. Truck came in Saturday with complaint of: after truck reaches operating temp. it starts a knock...
View
2005 Ford F-150 FX4 5.4L Timing componets VIN: 1FTPX14505
Customer complaint is ticking / rattle noise at start up, worse when cold. I verified a rattle noise that lasted 2-5 seconds from the front cover area. After the noise subsided no other noises or concerns noted. No noise upon hot restarts. I checked for TSB'...
View
2006 Ford F-150 XLT 5.4L Timing Belt VIN: 1FTPW14VX6
Replaced cam phaser on right side and timing chains, guides and tensioner after all put back together code P0018 comes up runs good just code. Replaced phaser due to it being broken. Also replaced cam. Code keeps coming up P0018. What would cause code to keep...
View
2008 Ford Fusion SE 2.3L abs module VIN: 3FAHP07Z68
This car is still haunting me. the tech didn't know the balancer kept the crank gear in place. Well we put in a used engine. Anyway after its all done I discover the red and abs lights on. My modis scanner won't communicate with the module. At first I thought ...
View
2002 Mercury Cougar 2.5L No Start VIN: 1ZWFT61LX2
Need to replace Fuel pump. To do so I must pull tank. To remove tank must disconnect filler neck. What is the procedure to separate filler neck from tank. Nothing in archives that I can find. AD and Ford just say remove. It's got a plastic locking collar on it...
View

Fixes & Summaries for Ford
Fix/Summary Answers
1996 Ford Windstar GL 3.8L 1-2 shift & Reverse VIN: 2FMDA5142T
Thanks to all of you who sent information, it was very helpful! The reason I haven't repaired it yet is that I ran out of time before having to close this. I am having to work on it as I can find the time. Also there isn't anyone near me that carries the parts...
7
2001 Ford Escape XLS 3.0L pressure?? VIN: 1FMYU02171
we installed oe parts, re flushed fluid, and seated the brakes are self (100 miles plus) brakes now operate fine. thanks for all your input!!
16
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next