Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for April 8, 2014
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2001 Chrysler Sebring LXi 2.7L flexplate/converter VIN: 1C3AL56UX1
Car came in with knocking noise when cold, could not confirm on first visit. When left overnight, found flexplate broken around crank bolts. Removed broken/cracked flexplate and noticed 1 bolt hole was modified(poorly) I figured it was because it was improperl...
2004 Chrysler Sebring LX 2.4L Cruise control VIN: 1C3EL46X84
Cruise control does not operate correctly. Continues speeding up past set speed until it hits about 10mph over the set speed, then the bleed solenoid opens and closes causing the car to slowly surge. On solus pro, in the speed control pids, it shows vehicle sp...
2005 Dodge Grand Caravan SXT 3.8L refueling VIN: 2D4GP44L45
We have a fleet of six handicap converted vans that we service. This van is new to the fleet and has a unique problem none of the others have had. The fuel tank is not stock and is relocated. The conversion company removes the control valve and rollover valve ...
2006 Dodge Magnum SXT 3.5L Electronic VIN: 2D4GZ47V86
This is an awd magnum that has two new wheel speed sensors but doesn't read properly. r.r. reads 0 l.f. tries to read a little. The transmission will not shift out of 1st. Does it need all wheel speed sensors for shifting? What does the sensor pick up in the h...
2008 Dodge Ram 1500 SXT 5.7L MIL Lamp on VIN: 1D7HU18218
Thanks for any help you can give, I hope some Chrysler techs can point me in the right direction. About a month ago I was given this truck with an EGR valve on the seat. The part came from NAPA, the customer had the truck scanned at AutoZone and was told it ha... Trouble codes: P0404 (EGR Position sensor)
2008 Dodge Ram 2500 SLT 6.7L drivetrain VIN: 3D7KS28A38
Hi Folks, This vehicle came in for a service and a brake check.Brakes were fine,test drove the vehicle,and under acceleration it is fine,but on deceleration when you get to about 45 mph,you start feeling a vibration.And the slower you coast down,the worse it g...

Fixes & Summaries for Chrysler
Fix/Summary Answers
1999 Chrysler Sebring LXi 2.5L Excessive Emissions, Poor Idle Quality, Stall, Misfire, Poor Fuel Economy, MIL Lamp on VIN: 4C3AU52N3X
Well thank you very much for all those who replied. I got allot of response on checking EGR valve. I had tunnel vision because it looked new. So I removed the egr valve plugged the vacuum port and wow it ran great. So for the hell of it i smoked just the egr v... Trouble codes: P0300 (Random misfire).
2005 Dodge Grand Caravan SXT 3.8L cluster VIN: 2D4GP44L25
All replies were helpful in this case. the pci bus was shorting to B+ intermittantly. All the readily accessible modules weren't the cause of course. the breaking point came after I had looked over the wiring under the IPM. thinking I had it fixed I test drove...
2005 Dodge Dakota ST 4.7L Mechanical VIN: 1D7HW28N85
I am closing this out due to time limitations but the customer is going to install a re-man valve body this week. The customer was kept in the loop the whole way and made the decision to try the pack so he is OK with the outcome. He or I will be attempting to ...
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next