|Prev||Professional Automotive Repair Technical Discussions for April 5, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2008 Jeep Wrangler X 3.8L No Start VIN: 1J4FZ24198
After rebuilding trans vehicle was returned to us for an intermediate click and no starter engagement. Customer states when problem happened they could get vehicle to start by firming putting shifter in the park position. We readjusted linkage, replaced range ... Trouble codes: P0403, P0706
Fixes & Summaries for Chrysler
|2000 Chrysler LHS 3.5L unknown VIN: 2C3HC56GXY
Thank you to everyone that posted but on this vehicle the reservoir was not the cause of whining. This vehicle rack would change the pressure while driving with vehicle speed. during my test drives I did not feel a change in pressure during driving. We determi...
|2005 Dodge Ram 2500 SLT 5.7L continues to pull VIN: 3D7KS28C95
Thanks to all who responded. I pulled the valve body and checked the TCC solenoid. It was fine. I pulled the TCC valve and spring to check it as well. All good. Fluid looked good and no metal in the pan. I pulled the transmission and looked at the converter an...
|1993 Jeep Grand Cherokee Laredo 4.0L ignition coil VIN: 1J4GZ58S4P
Fixed finally with 4th ignition switch from NAPA. The 1st one from NAPA was a bad new one, so ordered another one, and fixed. But customet came back with same problam. Ordered 3rd one, but it was also a bad one(possibly the 3rd one was the ist one: possibly NA...