|Prev||Professional Automotive Repair Technical Discussions for April 5, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|1999 Toyota Corolla CE 1.8L No Start VIN: 1NXBR12E0X
Hello my friends.I am pulling my gray hairs out on this one.Let me start from the beginning.I was hired to verify if this motor was bad or not.It has always started and ran,but had rough idle and strong fuel smell and vapors out of the exhaust.It was running v...
Fixes & Summaries for Asian
|2007 Hyundai Santa Fe GLS 2.7L Left intake cam VIN: 5NMSG13D57
I had a few replies that this is fairly common to this engine and a new head and cams should take care of it. I am closing this as fixed because I am confident that once I find a head,it will be fixed but finding the head is now the hard part. I had a few guys...
|2006 Nissan Sentra 1.8L transmision VIN: HR15RF1535
the tranisimission was replaced an the vehicle is working very good
|2006 Nissan X-Trail LE 2.5L engine and transimmision VIN: HR15FE4356
brain box (ecu)was not sending signal to airflow so we replace the ecu and the problem was solve
|2001 Toyota Solara SE 2.2L tourqe converter VIN: 2T1CG22P81
After extensive road testing I came to realize the trans was slipping in 4th not lockup.the PCM was seeing to high of rpm in lockup throwing a 770.after removing side cover on trans I noticed that when I assembled the trans on the bench I dropped the sealing o...