|Prev||Professional Automotive Repair Technical Discussions for January 3, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|2008 Hyundai Santa Fe SE 3.3L Variable cams VIN: 5NMSH13E78
Vehicle came in missing on bank 2 with stated codes. Vehicle owner was told at dealer that vehicle needed chains or an engine. Verified cam /crank on bank 2 was advanced. Manually activated solenoids while scoping current and found bank 2 had a different patte...
|1986 Nissan 300ZX 2 2 3.0L Stall VIN: JN1HZ16SXG
Need some help from the membership pool on this one. The vehicle will start up and run off the inital fuel prime but after that will deplete fuel and die. The problem here is what does the ecu rely on to allow pump operation my guess would be rpm from crank si... Trouble codes: 23 (Idle switch), 31 (Load signal)
|2007 Subaru Outback 2.5i Basic 2.5L engine VIN: 4S4BP61C87
This car was brought to us from another shop with a no start condition. I was told from the other mechanic it was a torn timing belt. The customer also wanted the heads removed to replace the head gasket and check the valves. We pushed the car in and I started...
|2002 Toyota Camry SE 2.4L 3-4 shift hot VIN: 4T1BE32K72
Has 3-4 shift when cold, not when hot. I do not have transmission information or I would check the wiring to these solenoids p0758 is shift sol.B and p1760 is linear sol. for line pressure. Thanks in advance.
Fixes & Summaries for Asian