|Prev||Professional Automotive Repair Technical Discussions for December 30, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1995 Chrysler Town & Country 3.8L MIL Lamp on VIN: 1C4GH54L4S
Vehicle came in with check engine light on code 43 set, code is intermitent, checked ignition coil with pinpoint test didnt find any issues, checked wiring for any issues from ignition coil to ecm, didnt find any issues, replaced ecm with the assumption i was ... Trouble codes: 43 (Primary ignition curcuit)
|2008 Jeep Grand Cherokee Laredo 3.7L MIL Lamp on VIN: 1J8GR48K18
hey jeep tech's wondering if u could shed some light on these codes on this jeep, she went to a shop and they scanned it and told her she needed three of the 4 o2's..so anyway she brought it to my shop and i went ahead and got all 4 of them since the dealer o2... Trouble codes: P0138 (02 sensor b1/s2 circut high), P0152, P0132, P1129
Fixes & Summaries for Chrysler
|2007 Dodge Nitro SXT 3.7L Electrical System VIN: 1D8GU28K67
After rechecking my work what I came up with was 2.9V on the B- side of the CAN network.I went back and checked resistance at the ALDL connector on the CAN network, should be about 60 Ohms with 2.5 V. Yeah NOT! I should have paid closer attention to this in th...
|1998 Plymouth Voyager Expresso 3.3L Defroster VIN: 2P4GP45R2W
AFTER MY ORIGINAL POST I WENT INVESTIGATING INSIDE THE DASH.I DISCOVERED THAT THE RECIRC DOOR WAS NOT MOVING,BUT THAT HAS NOTHING TO DO WITH MODE.I REMOVED IT(I ACTUALLY HAD TO PRY IT A LITTLE AFTER REMOVING SCREWS.I TESTED THAT ACTUATOR,AND IT MOVED.I POWERED...