|Prev||Professional Automotive Repair Technical Discussions for November 21, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|2000 Ford E-350 Econoline 7.3L No Start VIN: 1FDWE35FXY
please help. I am not a diesel expert just know enough to be dangerous, but customer does not trust anyone else.this vehicle was towed into our shop. the customer was driving it stopped for a couple of hours then it would not restart. I tried to start and cran... Trouble codes: P2112 (Icp pressure problem)
|2000 Ford F-250 Super Duty Lariat 7.3L Surge VIN: 1FTNX21F4Y
Looking for a little diesel help. When driving down the road at a steady cruise all of the sudden there is a loud rushing of air sound. When this happens the truck seems to lose power a little. If you depress the accelerator slightly the noise will stop almost...
|2002 Ford F-550 Super Duty XL 7.3L Cuts out VIN: 1FDAF57F52
Hi I have a 7.3 diesel tow truck that first thing in the morning starts good I let run for a min and head to town I live 3/4 of mile from the highway seems to run just fine for the first 2 1/2 miles then the power drops off till I am down to 25mph feels like n... Trouble codes: P0472
|2005 Ford F-250 Super Duty King Ranch 6.0L No Start VIN: 1FTSW21P45
Thanks in advance for any help, this vehicle had a blown head gasket, we put new head gaskets, ipr was broken so replaced that, but the vehicle does not starts, all the readings seems good, any help would be appreciated. Thanks. Trouble codes: P0261, P0267
|2006 Ford F-250 Super Duty XLT 6.0L Misfire, MIL Lamp on VIN: 1FTSW21P96
Complaint no power. Scanned vehcile codes po261, 264,267,270,273,276,279,282 injector low circuit. While problem occurs cylinder contribution -50 on cylinders 2,3,5 and 8. The first two injectors tested 1 ohm hot .9 ohms cold Trouble codes: P0261, P0264, P0267, P0270, P0273, P0276
Fixes & Summaries for Ford
|2001 Ford Ranger XL 2.5L No Start VIN: 1FTYR10C11
First off I would like to thank Christopher from Florida, Victor from Missouri and Loren [...] Idaho for confirming my suspicions. I felt from the symptoms that this vehicle was firing at an incorrect time and Chris from Florida convinced me to scope the cam an...
|2002 Ford Excursion Limited 6.8L driveline VIN: 1FMNU43S32
Never did get rid of vibration. Replaced U_joints, differential bearings. Had driveshaft balanced, replaced transfer case, balanced wheels. Checked brakes. Shimmed driveshaft angle. Nothing helps.
|2004 Ford E-450 Super Duty 6.8L MIL Lamp on, Stumble VIN: 1FDXE45S84
I replaced the ckp sensor also I tested the batteris both of them were bad changed those with a new ones. tested the veichle and it ran in good condition. changing the ckp and the batteris help to fixed the problem. Trouble codes: P0320 (Ignition/distrubiton speed engine circuit malfunction).
|2006 Ford Escape XLT 2.3L No Start VIN: 1FMYU03Z56
Hi Thank you to everyone who replied. Special shout to James from Missouri for the detailed post. We followed it to the letter and the truck started right up. Thankfully for the customer there were no other issues that came up due to him running the truck o...
|2006 Ford E-350 Super Duty 6.0L Cuts out VIN: 1FTSS34PX6
Thanks again for the help. Did the balloon test and the #1 bank was pressuring back into the fuel rail. Had a known good used injector laying around and swapped it in for #3 and it fixed the problem. No visual flaws to the copper washer or orings on any of the...
|2008 Ford Escape Limited 3.0L Turn Signal VIN: 1FMCU04108
Got this one fixed, It was the SJB smart junction box. Got ti from the dealer, tried to have another shop program it which didnt work he said the SJB was bad and had corupted files, So i took it to the dealer and they programed it. Job done. thanks for the he...