|Prev||Professional Automotive Repair Technical Discussions for November 3, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|2004 Ford F-250 Super Duty Harley-Davidson Edition 6.0L No Start VIN: 1FTNW21P64
First off I am a diesel Marine Technician, but have found IATN to be a great research tool. Unfortunately, I own a 2004 Ford F-250 with a 2003 6.0 and have been having a multitude of issues lately. I recently had a situation where the FICM was only producing a... Trouble codes: P2290 (Icp pressure low)
Fixes & Summaries for Ford
|2002 Ford Taurus SE 3.0L Poor Idle Quality, Surge, Stall VIN: 1FAFP53U22
well tech fans heres the scoop. turns out the problem is in the AC circuit violet wire from heater controller to computer. when this is energized the computer shorts out stalling vehicle and a no start problem. unplugged for now so she can use defroster . the...
|2002 Ford Ranger XL 2.3L electric thermostat VIN: 1FTYR10D82
First thanks to all who replied. The fix was a combination of a bad cyl. temp sensor, bad eng. and ecm grounds. The cyl. head temp sensor seems to be key to the way the ecm controls current to the t-stat. and temp display on the scan tool. The bad grounds onl...
|2007 Mercury Milan 2.3L compressor
Customer did not want to pay for labor to remove dash to access evap temp switch.