Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for September 5, 2013
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2006 Chrysler Sebring GTC 2.7L MIL Lamp on VIN: 1C3EL75R46
This car will set the p2098 every time you drive it 10 miles. Car originally came in with p0430 and p0153, replaced bank 2 cat and upstream 02. O2 is o.e and cat is carb compliant but not o.e. Car came back 1 week later with p0153 and p2098 codes. I have smoke... Trouble codes: P2098 (Post catalyst lean bank 2)
2007 Chrysler Pacifica 3.8L starter relay VIN: 2A8GM48L27
I have tested ign. switch from switch to pcm.I have never had one do this before.Crank starter and it will engage momentarily,if you keep cycling the key it will eventually crank and start.My question before condeming the ipm is the PCM sends a signal to the I...
2000 Dodge Ram 2500 Truck 5.9L engine VIN: 3B7KC26Z2Y
I replaced the original engine in this truck because the workers at the power plant apparently ran it without oil. It did drive in the shop but didn't run very well and had been sitting for at least 6 months prior to me seeing it. They wanted a "new" junkyard ...
2006 Dodge Sprinter 2500 2.7L a/c cond fan VIN: WD0PD64476
van came back with kinda cold a/c at idle and works great going down road what I found is I have no power to the a/c cond fan motor Mitchell telling me there a relay block under seat which I don't have does any one know where the fan reley is for the a/c cond ...
2007 Dodge Nitro SXT 3.7L Compressor, VIN: 1D8GT28K07
This nitro is turning my hair gray faster than my kids. The first ignition cycle of the day the compressor will not turn on, It will attempt to come on 3 times then nothing. While this is happening the power comes and goes then disappears entirely. I have mu...
2007 Dodge Ram 2500 Truck ST 5.9L Hesitation, MIL Lamp on VIN: 3D7KR28C27
Have replaced all above items, tubes have been torqued in, truck still loses power on acceleration. Keeps setting P0148. Any of you Cummins techs out there have any other suggestions? Trouble codes: P0148 (No power under acceleration)
2007 Dodge Caravan 3.3L Transmission VIN: 1D4GP21R77
Hi tecs. Strong problem here. Vehicule suck in 2 nd gear, trans in limp mode. P0700 (trans controller) but also B01CE and P00CD (unknown codes in PCM) What means??? Rough idle like missfires, but no missfires monitored. some times oil light comes on and shut o...
2009 Dodge Ram 5500 Medium Duty SLT 6.7L Security VIN: 3D6WD76L29
I replaced the water pump on this truck and now the security light is flashing. I checked for trouble codes did not find any. Cant really find much info on this problem. Thanks for your help.

Fixes & Summaries for Chrysler
Fix/Summary Answers
2004 Chrysler Concorde LX 2.7L Poor Idle Quality, Hesitation VIN: 2C3HD46R44
After some more test I replaced the throttleBody and this fixed the problem. I did more somke test Compression , running and regular. Found the saft was loose and that was the problem Trouble codes: 301 (1 cylinder Misfire 1year ago), 304 (Random cylinder misfire current).
2008 Chrysler PT Cruiser LX 2.4L Eng Temp VIN: 3A8FY48B88
Thanks to all that replied, those of you that said head gasket was right. When using the chemical head gasket test kit, it did not show up. I decided to use the 5 gas analizer and after an extended test it showed as much as 175ppm hc%. We replaced the head gas...
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next