|Prev||Professional Automotive Repair Technical Discussions for May 5, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|2005 Hyundai Santa Fe GLS 3.5L low power VIN: KM8SC73E45
this has been the truck from hell. first brought it in with a complaint of wont go over 60 mph and seems to be worse when it is wet out. my tech drove it and noticed it had no 5th gear so rpm was high at 60 mpg but no missing felt. there were three codes store... Trouble codes: P0016
|2006 Mazda 3 S 2.3L No Start VIN: JM1BK34376
This was a tow in it will start for 1-2 seconds when noid light is bright when it starts for the two seconds. It does not loose spark and will run with starting fluid. The noid light goes very dim even when running on fluid and when it dies. If I hold the key ...
|2004 Toyota Camry LE 2.4L MIL Lamp on, No Communication
This vehicle comes from another shop, came to me with the whole interior torn apart. the vehicle runs great, battery light is on but alternator voltage is 14volts. and check engine light is on, but no communication to pcm or any other modules. I haven't had mu...
|2007 Toyota Camry Hybrid 2.4L abs VIN: JTNBB46K77
code C1253 I will appreciate any help from anyone that has come across this code, every time time the brakes are applied it makes a motor type noise from under the car by transmission area,also even when the engine is turn off the ABS motor keeps working inter...
Fixes & Summaries for Asian
|2000 Honda Accord EX 3.0L No Start, Poor Idle Quality, Hesitation, Cuts out, Stall, Misfire VIN: 1HGCG2259Y
Thanks for all the help. I was unable to change anything nor adjust the valves. I was going to replace the fuel pressure regulator or remove the valve cover, but just before i could do any of these changes i started the car up and it started normal without a... Trouble codes: P1399 (Misfire any cylinder).