|Prev||Professional Automotive Repair Technical Discussions for April 11, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1996 Dodge Ram 3500 Truck 5.9L cruise control VIN: 3B7MC33C0T
Cruise will set, engine rpm increase and decrease like surge. Target speed holds on scan tool, vehicle speed on scanner 2 to 5 mph less than target. Speedo 2 to 5 mph higher than target. solenoids will vent and block as rpm and speed change. All switch functio...
Fixes & Summaries for Chrysler
|2008 Chrysler Town & Country (Van) Limited 4.0L Srs Module VIN: 2A8HR64X58
THANK YOU FOR ALL THE REPLIES. YOU WERE CORRECT THE WRONG MODULE WAS INSTALLED. THE DEALER SAID IF THERE TECH SAID IT WAS RIGHT THEY WERE STICKING WITH IT. SO WE INSTALLED THE CORRECT MODULE UNLOCKED IT AND ALL WAS RIGHT. THE OWNER SAID THEY WOULD DEAL WITH CH...
|1998 Dodge Ram 1500 Truck ST 5.9L TransferCase VIN: 1B7HF13Z6W
I'm calling this one fixed. Got alot good response and checked all items mentioned. We did find a bound up u-joint on the LF axle which we repaired. Checked out the actuator collar, etc all seemed OK there. Turning the front wheels by hand the tires moved in o...
|2001 Dodge Grand Caravan ES 3.3L Electronic VIN: 2B4GP44R91
First I would like to thank every one for replying. Big thanks to Bob for telling about pin 11, I checked this and only would light test light for 1 second and go out, added 12 volts to this pin 11 and every thing was working normal, removed the added power an...
|2002 Dodge Durango SLT Plus 4.7L ambient temp gauge VIN: 1B4HS58N72
The fix was to go into the HVAC, select misc., select disable ambient temp sensor, erase the DTC, turn the ignition off for 5 seconds, then back on and verify the code is gone. Josh gave us the missing piece to the puzzle, by telling us that you have to drive ...