|Prev||Professional Automotive Repair Technical Discussions for January 5, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1997 Dodge Intrepid 3.5L no heat VIN: 2B3HD46F9V
Hello all...Using Jason's account to get some help. So here we go. Car didn't have good heat, replaced radiator after finding leak in upper corner, refilled and had 140*F heat @ defroster vents at 2000 rpms, 130* heat @ idle. Weather had warmed up when this wa...
Fixes & Summaries for Chrysler
|2003 Chrysler Town & Country (Van) LXi 3.8L Sliding Door VIN: 2C4GP54L63
OK Guys, This one is finally fixed. As mentioned I had already tried replacing the lower track wiring and the latch assy with no luck. I didn't find any codes in the system for the door operation so really couldn't rely on that. I ended up replacing the door m...
|2004 Dodge Durango SLT 4.7L No Start, no crank VIN: 1D4HB48N74
Happy New Year This vehicle is back on the road after help from Identifix making sure all power and grds were good at the pcm and ohms testing PCM and FCM. I removed the battery cables fasten them together for several minutes while working on onather projec...
|1996 Jeep Grand Cherokee Laredo 4.0L No Start VIN: 1J4FX58S4T
After doing all those repairs previously mentioned, it turns out it was the harmonic balancer outter ring that had rotated a few degrees throwing us of when seting timing. I had tried just about everything. Here is what I was doing, checked all the timing mar...