|Prev||Professional Automotive Repair Technical Discussions for December 14, 2012
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2002 Chrysler Town & Country (Van) EL 3.8L Doors VIN: 2C8GT64LX2
Intermittantly, both side doors will not open w/the key fob or the console switch. The doors will pop out but will not open fully. If you reclose the doors, sometimes it will then work properly several times then it will act up again. We sent it to Chrysler fo...
Fixes & Summaries for Chrysler
|2008 Chrysler Town & Country (Van) Limited 4.0L No Start VIN: 2A8HR64X28
Thank you all for taking the time and patience to respond for this troubled child. I did what you guys suggested, which I should have done first thing, and I checked if I was loosing power from the ASD or loosing ground trigger from the PCM. Ended up there w...
|2003 Dodge Stratus R/T 3.0L Misfire, MIL Lamp on
had wrong crank gear making the crank sensor out of time by one tooth someone put used motor int he car new gear all is ok Trouble codes: P0335, P0340.
|2000 Jeep Grand Cherokee Limited 4.7L Instrument cluster, power windows VIN: 1J4GW58N7Y
Thank you all for your replies. I went thru and checked all grounds and they were good and clean. I also checked the wires in the door that were mentioned and none of them were broke. I opted to replace the bcm due to the fact I was able to get it to act up ag...
|2006 Jeep Grand Cherokee Limited 4.7L Bus Circuit VIN: 1J4HR58N76
well i do appreciate everyones responses, sry for my last post that was actually boss man but i explained the situation to the vehicles owner and gave her options which is resulting in the vehicle leaving my line of sight..lol but i just figured its not worth ...
|1994 Plymouth Grand Voyager SE 3.3L No Start VIN: 1P4GH44R0R
would like to thank everybody for their time .i replaced pcm and it cut off again and would not start..i changed cam and crank sensor 2 times,and it runs. the test on the cam and crank always showed good this one had me pulling hair thank you again.