|Prev||Professional Automotive Repair Technical Discussions for December 13, 2012
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2002 Chrysler 300M 3.5L Rpm Input Sensor VIN: 2C3HE66G52
Our client installed a used trans. He had a code P0731 (Input sensor)after trans. replacement then he replaced the input sensor. Now he brings it to us. With the engine running and in gear I get a/c voltage at sensor. Back probing connector #4 at pcm terminal...
|2003 Chrysler PT Cruiser GT 2.4L cluster display an all other lights VIN: 3C4FY78G23
Seems to erratically fluctuate the voltage. Seems to be a common problem. With seeming no predictability this comes and goes. Any solution.Word has it dealer tells you to live with it. No tsb's that I can find
|2005 Chrysler Crossfire 3.2L MIL Lamp on VIN: 1C3AN65LX5
Repair all of the above.drive car 40 mile check engine lamp on now im getting 2/1 p0153 and 2/2 p0137.I checke d wiring all looks good I smoke and pressure test exhaust cold no leaks.I swapped the 2/1 and 2/2 o2 with the other Bank and no change still comes ba... Trouble codes: P0153, P0137
|1999 Dodge Ram 2500 Truck 5.9L fUEL GAUGE VIN: 1B7KF2369X
I have checked all related wiring connecters and pcm and found no problems. The fuel sending unit reads 189 ohms which does not correlate to gauge reading. I can put 3000 ohms across the terminals at the fuel tank and the gauge reads 1/2. Question is does anyo...
|2004 Dodge Ram 1500 Truck ST 5.7L Mechanical VIN: 1D7HU18D74
Thank You for taking your time to read this post! This Ram was purchased at auction for our dealership. The issue is, i have an engine tick. It doesn't sound like the "Hemi Tick" valve train noise. I isolated the noise to what i thought was in the passenger (l...
Fixes & Summaries for Chrysler