 Prev |
Professional Automotive Repair Technical Discussions for October 26, 2012 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 1998 Dodge Caravan 3.0L all shifts VIN: 2B4FP2539W The transmission is shifting weird in that it shifts fine if you keep your foot in it but if you back off the throttle before a shift or during a shift it acts like it binds during the shift and makes for a very harsh shift. Tryed a different solnoid pack no d... |
View | |
| 1999 Dodge Ram 1500 Laramie 5.9L Misfire Hi all! Got another one that is currently stumping us and a search on here and google has turned up nothing applicable. This truck is incredibly well taken care of and in great shape. It came in after having all the injectors, plugs, and wires replaced. It mis... Trouble codes: P0132 (O2 Sensor Shorted to Groudn), P0300 (Misfire), P0302 (Cyl 2 Misfire), P0304 (Cyl 4 Misfire), P0306 (Cyl 6 Misfire) |
View | |
| 2007 Dodge Ram 3500 Laramie 6.7L MIL Lamp on, long crank time VIN: 3D7KS28AX7 Truck came in with check engine light on and long crank at start-up. Sometimes it will start right up and other times it won't. Scanned, had PO341-camshaft sensor perf. P2121 Accelerator sensor/perf. and P226B-undocumented code, all stored codes. Cleared the c... Trouble codes: P0341 |
View | |
| 2000 Jeep Grand Cherokee Laredo 4.0L No Start VIN: 1J4G248S2Y Checked wiring and fuses. Have no power to injectors and therefore no trigger. Replaced ASD relay. Replaced and reprogrammed PCM. Still no start. Has a P1389 code. Can't get voltage to injector fuse (fed by ASD relay) Trouble codes: P1389 (no ASD relay output voltage) |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 1996 Dodge Ram 3500 5.9L No Start VIN: 1B6MC3656T After testing all the wires and again confirming powers and grounds we came up with the REMAN ECM being bad. Customer had replaced numerous parts including crank sensor, coil, plugs, wires, cap, rotor, ECM... As suggested I check my 5 volt signal out of ecm, I... |
8 | |
| 1999 Dodge Ram 1500 Laramie 5.2L MIL Lamp on VIN: 3B7HC13Y0X Thanks to all that responded on this one. The code came back as a hard code. TPS and IAC did nothing for this one. It needed the TPS so I put a new one on it. Fortunately I had another truck here and I changed the IAC, no difference. I rechecked the wiring goi... Trouble codes: P0505 (IAC motor circuits shorted). |
3 |
