Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for August 15, 2012
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2000 Dodge Ram 3500 Truck 5.9L calipers VIN: 3B6MC3666Y
Vehicle presented with RF caliper locked, dust boot damaged as well as rotor badly damaged. Replaced both rotors, pads, and RF caliper and bracket. Front brakes dragging, can turn by hand but difficult. Releasing bleeder and brake line at caliper not helpful. ...
View
2003 Dodge Durango Sport 5.9L pcm VIN: 1D4HR38ZX3
Hi guys in need help this Durango came from another shop. the customer states that going down the highway as she turned the cruise off the it stalled like the key was turned off. 1st shop diag it as a computer. They put one in and it went up in smoke instantly...
View
2004 Dodge Dakota SLT 4.7L compressor VIN: 1D7HG48N14
The compressor does not engage. we have a/c request from the control head the pcm does not give ground to coil on relay we suspect evap temperature sensor does anyone know what that should read with a dvom? i have not found a PID for it on my Modis or Genysis
View
2005 Dodge Magnum R/T 5.7L Stall VIN: 2D8GV58295
After refueling, the engine will die on the first acceleration only.
View
2005 Dodge Grand Caravan SXT 3.8L Transaxle VIN: 2D4GP44L95
It's always the easy fixes that grind your ax. Had an 05 Grand Caravan dropped off with a "wont move" issue. Owner said she put it in gear, heard a snap and no movement, no warning. Got in a very clean car with 144904 miles on it. Started and ran fine, no MIL...
View
1967 Jeep Jeepster 3.7L Poor Idle Quality, Poor Fuel Economy VIN: 8701016107
Into the way back machine, working on this 1967 jeep jeepster, engine just has a poor idle like a lean misfire, all cyinders on the left of engine contribute to engine proformance all cylinders on right of engine feels like maybe 50% contribution by remove plu...
View
1999 Jeep Grand Cherokee Laredo 4.0L Hesitation, Cuts out VIN: 1J4G258S2X
Hello all, thanks for your help in advance, we have a 99 jeep Grand Cherokee, straight 6, that has a problem accelerating past 25mph. Feels like the car is starving for gas, it hesitates and buckles but runs fine until you hit about 25 mph. Customer said about...
View
2001 Jeep Grand Cherokee Limited 4.7L hydraulic fan VIN: 1J4GW58N61
Good afternoon fellow technicians. I am in need of some help with a problematic Jeep. The hydraulic fan is not working and the power steering assist will gradually disappear. We replaced the steering gear for another reason and had the issue with the fan and t...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
2007 Chrysler 300 (Car) C 5.7L Oil pressure VIN: 2C3KA63H47
Everyone was right main bearings took a shot from the low oil pressure. The customer took it back to the shopthat rebuilt the motor and they put a crank kit in it and no more problem. Thanks for all the responces
18
1990 Dodge Dakota 3.9L fuel VIN: 1B7GG26X6L
Finally found the problem to be in one of the injectors, didn't have a good spray pattern all the time, replaced them both in the TBI unit, all good now
12
1991 Dodge Dakota 5.2L Hesitation, Stall, Misfire VIN: 1B7GL23Y4M
well its been 2 months and the hesitation problem has not returned. The only thing we did was run some fuel cleaner through the system gotta love these old ones.
9
2005 Dodge Durango Limited 5.7L Valve Lifters VIN: 1D4HB58D55
Replaced oil pump and complete valve train. At this point I would consider oil pump the failure item. Yes the maintenace was lacking. But even vehicles with perfect maintenance and half the milage have noisy lifters. I firmly believe the oil pump failure has t...
5
1999 Plymouth Prowler 3.5L Steering VIN: 1P3EW65G0X
IATN Rocks. Everybody was right on the money with unhooking the tie rod ends and then trying to turn the wheels on the turntables of the front end machine. The right lower ball joint was bad. We re-installed the customerís original rack and replaced both lower...
7
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next