|Prev||Professional Automotive Repair Technical Discussions for July 1, 2012
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2000 Dodge Intrepid 2.7L coil pack VIN: 2B3HD46R2Y
first thing i notest was the coil packs ground resistors connectors were burnt onto resistors and a low resistance on both resistors and no signal to all coil packs. customer calls saying he shut car off and now it wont start but will crank over. I hooked up ...
|2008 Dodge Ram 2500 Truck SLT 6.7L MIL Lamp on VIN: 3D7KS28A98
This truck has an intermittent throttle problem. The vehicle loses all power and code P2121 is present. The throttle pedal assembly has been replaced. Th truck travelled a further 2000 klms without a problem. At this stage code P2121 was again present and loss... Trouble codes: P2121 (Tps)
|2009 Dodge Journey SXT 3.5L Pads, rotors VIN: 3D4GG57VX9
The inboard and out board pads on the rear are at less than 2 mm thickness. The rotors are not warped and the brake pedal is normal travel. The front pads are at about 10 mm thickness. My question is why are the rear pads worn out before the front pads?
Fixes & Summaries for Chrysler