|Prev||Professional Automotive Repair Technical Discussions for July 1, 2012
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|2004 Nissan Altima SE 3.5L No Start, MIL Lamp on VIN: 1N4BL11D84
originally came in barely running, backfire, stallin etc. had dtc for cam sensor bank 2. replaced that sensor and started car and it set a code for bank 1 cam sensor. replaced that sensor and started and it now throws p00021. we have worked on a couple of thes... Trouble codes: P0021
|2008 Subaru Legacy GT Limited 2.5L A/C, Secondary air & codes VIN: 4S3BL67608
Hello all. I got this Legacy from another shop. The car was hit in the right front. In KOEO the A/C clutch and fan cycle on and off until KOER then it works fine. Also codes P1152, P1153 & P0140 will show up when you turn the ignition off then back on, If you ...
Fixes & Summaries for Asian
|2005 Kia Sorento EX 3.5L Cam plugs VIN: KNDJC73385
A huge thanks to John from Georgia. The oil return holes were plugged up. Pulled the valve covers off, cleaned them out, and no more problems. Chalk that one up to learning.
|2001 Nissan Sentra GXE 1.8L Cuts out, MIL Lamp on, poor power VIN: 3N1CB51D51
After taking a step back , i started with a mechanical diagnosis, did compression test and they were all even at 125 BUT called for 165-185, plus there was excessive slack in the chain. I did a CLT test BUT with the cylinders at TDC when i applied shop air (re... Trouble codes: P0100 (MAF circuit A).
|2002 Nissan Altima S 2.5L Engine VIN: 1N4AL11E12
Thanks to all who replied, the end result was replacing the engine, after inspecting the engine it was discovered the converter was never replaced causing the replacement engine to fail very quickly. It seems to me that if Nissan knows of this problem (and the...