Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for October 6, 2011
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1999 Chrysler LHS 3.5L Stall, MIL Lamp on VIN: 2C3HC56G5X
Here we go again. I am burning it up on here lately! Car came in no start. Pulled codes and originally got P0406, P0123, P0405, P0122, P1496. Started checking and TPS, EGR, MAP, and A/C transducer had no 5V ref. After chasing it down found the wiring harness o... Trouble codes: P1496
View
1996 Dodge Dakota SLT 3.9L Cuts out VIN: 1B7GL23X8T
Initially customer requested that we replace PCM. We did so, month later came back with vehicle intermittently shutting off. We replaced cap,rotor wire and plugs,and coil do to arcing and wear and tear. One month late replaced crank sensor because of a no star...
View
2001 Dodge Dakota 3.9L Hesitation, Misfire VIN: 1B7HLZAX51
This truck runs great most of the time but every now & then, (could be days even weeks) the truck will start to act like several wires are crossed & it backfires through the intake and almost stalls. The customer says it will start acting up while in reverse m... Trouble codes: P0305
View
2002 Dodge Dakota SLT 3.9L No Start VIN: 1B7HL48X42
This truck came in with a crank no start condition. The odometer says No Bus. I suspect the skim module, because I have no communication with any of the modules and the IPC doesn't come to life, even the gauges do not work. I cant find any way to test the SKIM...
View
2003 Dodge Ram 2500 Truck 8.0L Steering VIN: 3D7KU26D13
This truck is almost scary to drive on the highway. Always overcorecting and you must have your hands at 10 and 2 on the steering wheel. I have re-checked the front end for worn parts and found none. The steering stabilizer is working well. I unbolted it and w...
View
2006 Jeep Liberty Limited 3.7L Unknown VIN: 1J4GL48K56
jeep was towed to the shop because it would not crank over. checked the starter relay and not getting signal from the pcm. hooked up scanner and can't communicate with the pcm bcm tcm. the other modules are giving me messages saying they are not getting signal...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
1995 Dodge Dakota 5.2L caliper, booster VIN: 1B7GG23Y2S
We replaced the front brake calipers & brake pads that were just replaced by the first repair shop. Standard bleed procedure & we have a good pedal! This was a strange one as we have not been stumped by a simple fix like this for awhile. The other shop had ins...
8
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next