 Prev |
Professional Automotive Repair Technical Discussions for July 10, 2011 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 2005 Ford F-250 Super Duty XLT 6.0L No Start VIN: 1FTSX21PO5 This truck came in with a no start. Cranks but doesnt fire Scanned and got 8 low voltage codes for all the injectors. Determined the injector driver not working. Install new driver and reprogram with rotunda ford programming software. Still a no start. Now I g... |
View | |
| 2006 Ford F-250 Super Duty XL 5.4L Fueling VIN: 1FTNF20526 This truck will not take fuel. About 1.2 gal befor the nozzle shuts off. Remove evap line going to canister and will take fuel. Installed new evap canister and new vent kit as per tsb 09-8-12. Cheched the 3 vent lines coming off the fuel tank. All vent lines c... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 1994 Ford Ranger STX 4.0L No Start VIN: 1FTCR15X7R engine had 1 cracked head and the other one was warped. replaced engine runs great |
16 | |
| 2001 Ford F-150 XL 4.2L Hesitation, Cuts out, MIL Lamp on VIN: 1FTZF17221 Well after getting more information from the customer he said the problem didn't start until he replaced the alternator . Come to find out he got it from a salvage yard. I checked the output of it and it was a constant 15.6 volts with or without load so maby ... Trouble codes: P1519. |
11 | |
| 2010 Ford F150 4.6L High rpm VIN: 1FTEW1C88A thanks for your help everyone fix this truck by installing a new throttle body the dealer told me it has to be new not used because a new comes ready to recalibrate the FORD IDS is no option for relearning |
5 | |
| 1999 Mercury Cougar V6 2.5L No Start VIN: 1ZWFT61L9X Ok guys this one is finally fixed(thanks to all who replied).I went with the advice from Dan(thanks again Dan)and loaded the circuit using a halogen sealed beam headlamp.Fuse was OK,then decided to run pump using jumper wires between battery power and the grou... Trouble codes: P1233 (fuel pump driver module offline), P1237 (fuel pump secondary circuit). |
7 |
