Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for July 5, 2011
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1988 Chrysler New Yorker Landau 3.0L Cuts out, Stall VIN: 1C3BU6634J
Car came in ona hook for a stall back in November. At that time we could not duplicate the problem. Ignition was very old so did a complete tune up. Car was fine until about 5 weeks ago. Customer said car would stall, and then this time would not start. Had to...
1998 Dodge Dakota Sport 2.5L Electronic VIN: 1B7FL22P2W
Thanks for taking the time to read this request. This Dakota will not engage the A/C compressor unless the park brake is depressed far enough to turn on the "Brake" warning lamp in the cluster. Release the p/brake the comp turns off. Depress p/brake the compre...
2005 Dodge Ram 1500 Truck SLT 4.7L Cel VIN: 1D7HU16N05
I have this dodge ram that keeps coming back with a p2096. We have checked for any exhaust leak, found what looked to be a crack/split around the bank 1 sensor 2 bung. We replaced the exhaust and B1S2 sensor. Was good for a few weeks, but now has came back. I ... Trouble codes: P2096
1999 Jeep Grand Cherokee Limited 4.7L compressor VIN: 1J4GW58N6X
Hey guys got a weird one here.the compressor would not run.checked voltages at relay good powers,but no ground to pull in the relay.the ground comes from the pcm,so i commanded on with my modis and it would cycle.i voltage dropped all powers and grounds and th...
1999 Jeep Grand Cherokee Laredo 4.7L Instrument Cluster VIN: 1J4GW68N3X
Sorry for the upcomming extended post in advance. This vehicle came to us from the local Chrysler dealer after being there for months. The customers original complaint was the security light was on. They replaced the SKIM and now the gauges will work fine an...
2000 Jeep Cherokee Sport 4.0L intermittent die out VIN: 1J4FF48S4Y
this car was towed in two months ago with a no start condition.the dash had lights on that would not go out .thought it was a security key problem but was able to eliminate that, when i had the cluster out, i could start and drive the car.put the cluster back ...

Fixes & Summaries for Chrysler
Fix/Summary Answers
2004 Dodge Ram 3500 Truck SLT 5.9L No Start VIN: 3D7MU48C14
Opps sorry close date went by (vacation). We put a reman ecm on and had it reprogrammed, truck also has cluster issues and transmission issues, but they declined further diagnosis/repair. Although used ecm's are a gamble on these (may end up with a vin...
2008 Dodge Sprinter 2500 3.0L maintenance ind VIN: WDOPE74568
Reset was done without using a scan tool. Not easy! but Kevin [...] sent me the procedures. After about the tenth time it worked. Thanks to all those that responded, one down and many more to go. Thanks!
1999 Jeep Grand Cherokee Laredo 4.7L Tcm VIN: 1J4GW68N3X
Well, I received a few responses on this one saying to check for possible harness damage, faulty solenoid/temp sensor assembly or bad inputs to the TCM. We replaced the solenoid pack with no difference. I physically removed/inspected the entire wiring harnes...
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next