
![]() |
Professional Automotive Repair Technical Discussions for July 1, 2011 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for European
Help Request | Answers | |
2003 Mini Cooper 1.6L Steering VIN: WMWRC334X3 hey everyone, just replaced a power steering pump assembly and fan. power steering fan does not turn on at all except when i control it with my scan tool. radiator fan cycles on/off at engine normal temps about 100C, turn on ac and ps fan still does not operat... |
View | |
1976 Volkswagen Beetle 1.6L No Start VIN: 1162099955 Hi all in IATN land. Trying to help this Pearl Harbor survivor Vet. He states the car ran fine before he stored it for the winter. Had poor spark when I started testing. Installed points and condenser and spark is fine. I have no injector pulse to any injector... |
View | |
2003 Volkswagen Jetta TDI 1.9L No Start, MIL Lamp on VIN: 3VWRP69M93 engine just stopped running while driving, no other codes stored, we checkede and could only perform part of the flow chart test with a generic scanner, 2 parts need tested on code po252, both parts test ok, replaced fuel filter, still not start, kinda at a lo... Trouble codes: P0252 |
View |
Fixes & Summaries for European
Fix/Summary | Answers | |
2003 Land Rover Freelander SE3 2.5L Misfire VIN: SALNY12283 Fixed! I made the common mistake to assume that the repaired ECU was repaired properly and thus looked everywhere else for the fault. The ECU was repaired a second time and it works great now. Thank for the help. Some of you told me to do the obvious, swappi... Trouble codes: P0303 (Misfire 3). |
10 | |
1999 Saab 9-3 2.0L No AC Compressor VIN: YS3DD55N9X The fix is interesting. I missed one thing. When turning on the fan at low speed, yes it did give power to the orange wire at the AC switch but i missed that the blower motor was not turning at that speed. So that means that the resistor's first path was open ... |
1 |