Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for April 9, 2011
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2007 Chrysler Aspen Limited 5.7L Park Assist VIN: 1A8HW58287
Backup sensor system inop - has codes in system for all 4 sensors. I have plugged in each sensor 1 at a time to the same connector at facia, 2 sensors set codes as soon as I run the wiring test with Witech, 1 sets cir low code, 1 sets ring time too short. 2 of...
View
2006 Dodge Ram 2500 Truck SLT 5.9L Trans Mount VIN: 3D7KS28C46
Hey folks, hope you can help on this one. Already checked for tsb's and in the knowledge base on this one. Here is the problem. The rear transmssion mounting bolts broke inside the case. After checking the motor mounts, they are good. Drilled them out and thro...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
2003 Dodge Neon SE 2.0L MIL Lamp on VIN: 1B39526C23
After Changing the Cam sensor the Cam/Crank Diff. Changed to 6 Deg. Changed timing belt thinking the rest was streach in the belt and I had no Change. Crank sensor Was changed bc of damage when removed for inspection. No change with the new sensor. Trouble codes: P0016.
8
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next