|Prev||Professional Automotive Repair Technical Discussions for March 26, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1996 Ford F-150 XLT 5.8L Monitor VIN: 1FTEF14H1T
Thanks in advance This vehicle failed an emmission inspection because the non-continuous monitors (O2,O2 Heater,EGR and Catalyst) are set to not ready. All will set to ready after a short test drive,but after turning the ignition off for a few moments,will re...
|1999 Ford Windstar LX 3.8L MIL Lamp on VIN: 2FMZA5142X
O.K. the Windstar is back. Originally this car came in for a squealing noise in the synchronizer assm. After replacing it with the cam sensor we started getting a P1309 code. We replaced it again with an OE and after 15 miles the code came back, we replaced th... Trouble codes: P1309 (Misfire monitor not completed)
|2006 Ford E-350 Super Duty XL 5.4L engine VIN: 1FDWF32556
I have a 2006 ford f350 with a 5.4l engine with a misfire code p0307. Found what appeared to be water in the #7 plug tube(spark plug was installed) when I removed coil pack. I pressure tested cooling system to see if this was a coolant leak but to me it appear...
Fixes & Summaries for Ford
|2003 Ford F-350 Super Duty XL 6.0L No Start VIN: 1FDWF36P73
This one is fixed. This engine is an old style with the round egr cooler and the square intake manifold Like i said i could hear or feel the leak at both valve covers. And i was closing the IPR valve. I took Both valve covers off and found nothing. I removed ...
|2003 Ford F-550 Super Duty XL 6.8L MIL Lamp on, Monitors won't run VIN: 1FAFP57BU1
Sorry for taking so long getting back to this, been real busy lately. Anyways I think this sucker is fixed, turned out to be a maf. Checks included updating baro pid (163hz. at sea level), maf idle v at 1.08, snap throttle v at 4.6, good. Voluimetric effecien... Trouble codes: P0171 (B1 Sys. Lean), P0174 (B2 Sys. Lean).