|Prev||Professional Automotive Repair Technical Discussions for March 26, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|1997 Honda Civic CX 1.6L No Start VIN: 1HGEJ6221V
Hello fellow techs. I have this 19997 Honda Civic that intermitantly has a crank no start condidtion. I got it to duplicate once and when it did not want to start i HAD spark and injector pulse. the vehicle started after unplugging number one and number two in...
|2007 Honda Accord EX 3.0L MIL Lamp on VIN: 1HGCM668X7
Veh came in with P0498 & P0499 - Evap canister Vent shut valve ckt low voltage & High voltage respectively. Replace the VSV valve. After road test the code poped again. Check the connection at the charcoal canister, seems shady so I repaired it. Road test and ... Trouble codes: P0498 (Evap canister Vent shut valve ckt low voltage), P0499 (Evap canister Vent shut valve ckt High voltage)
|2002 Infiniti QX4 3.5L No Start VIN: JNRORO9YX2
Hi all i got the 02 infinity qx4 it cam on tow truck as a no start(i asked the customer if the vehicle quit while he was driving) he said no it actually was parked and when he tried to start it it crank but no start, i checked for spark and there is no spark, ... Trouble codes: P0021 (Bank 2 intake valve timing control range performance), P0011 (Bank 1 intake valve timing control range perormance)
|2006 Toyota Tundra SR5 4.7L MIL Lamp on VIN: 5TBET34116
Hey guys, I have a 06 Toyota tundra on which I canít seem to get the mill to stay off.The code is po158 for O2S B2-S2. If I understand the reason for the code is the ecm is seeing voltage of .56 or more for 2 trips, or 1.25 volts for 30 seconds. Bank 1 sensor ... Trouble codes: P0158
|2011 Toyota CAMRAY 2.7L timing chain VIN: 4T1BF3EKXB
How do you reset the intake camshaft sprocket to advanced position? Toyota says not to install sprocket in the retarded position and it should be advanced position. TIS says to release the 'lock pin' but I can not find the lock pin on the intake sprocket. Anyo...
Fixes & Summaries for Asian