|Prev||Professional Automotive Repair Technical Discussions for February 17, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2006 Chrysler Town & Country (Van) Touring 3.8L Engine VIN: 2A4GP54L16
Engine is using a lot oil. No leaks. Not real noticable on the spark plugs. Not a lot of info.
|2004 Dodge Stratus ES 2.7L Low Power VIN: 1B3EL36R74
I have a 2004 Dodge Stratus 2.7 here complaint of run rough and low on power. Customer did ran out of gas before coming in. Road test and verified low on power but not run rough. Engine idle very smooth. Scan for codes, none found. All data look normal includi...
|2005 Dodge Ram 1500 Truck Laramie 5.7L Instrument cluster VIN: 1D7HU16D15
I have a 2005 ram 1500 that the has a parasitic draw of 1 amp. I narrowed the draw down to the instrument cluster. With the cluster unpluged the draw is 20ma. I replaced the cluster and still have the same problem. something is preventing the cluster from powe...
|2007 Dodge Ram 1500 Truck SLT 4.7L transfer case VIN: 1D7HU18N37
Hello everyone, I posted yesterday for the wrong vehicle. Sorry, long day. The problem I am having is with a 2007 Dodge Ram 1500 pickup. It had p1405 code in it. My Modis or Launch won't do much, but the genisys shows data. Customer had taken to the dealer and...
|1995 Jeep Wrangler SE 4.0L lock out VIN: 1J4FY29S0S
This Jeep breaks the front axle disconnect shift fork. He is on his fourth. This Jeep has relatively low milage but he does plow with it. The fork breaks where the fork is attached to the diaphram shaft. There is not much to this part of the system and nothing...
|1993 Plymouth Colt Vista 1.8L No Start VIN: JP3CB20C1P
calling all plymouth chrysler specialists i really need your help on this one.Ok i got spark at 30 kv and my fuel pressure at 45 with the engine cranking.I checked compression on all four cylinders cyl 1 has 150,cyl 2 has 90 psi,cyl 3 has 150 and cyl 4 has 150...
Fixes & Summaries for Chrysler
|1998 Chrysler Cirrus LXi 2.5L Hesitation VIN: 1C3EJ56H2W
it was as most of you said which proved what i was thinking. it needed a distributor
|1999 Chrysler Sebring JX 2.5L No Start VIN: 3C3EL45H7X
Thanks to all who took time to offer help. We finally found a strange glitch in the ckp pattern...the first square wave wasn't perfectly flat at the top portion of the wave. We removed the ckp & used a boroscope to look at the flywheel...it was a used engine &...
|2006 Dodge Ram 1500 Truck SLT 5.7L Transfe Case VIN: 1D7HU16286
Thanks for all the help guys. I didn't get to fix this one. Body shop had previously sent this truck to dealer and they were supposed to have fixed it. Body shop decided to send it back to delaer. Fine with me, I just won't know what fixed it. I think Oscar, J...
|2003 Jeep Grand Cherokee Laredo 4.0L No Start, Cuts out, Stall VIN: 1J4GX48S63
I got 9 great responses to my help request. Mathew from New York said the fuel sender went through the PCM, there was a wire under the truck that rubbed through and would ground and mess us up the PCM. I never did find out what the weird error messages were ab...