|Prev||Professional Automotive Repair Technical Discussions for January 8, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1992 Dodge B150 5.2L No Start, Surge, Cuts out, Misfire VIN: 1B7HE16Y9N
Need help with this one please, When you first turn the key on there is no engine light, if you wait about 3 or 4 minutes the ASD relay and the one right next to it (unable to identify it) start clicking slowly then faster then the engine light comes on.( Also...
|2008 Dodge Avenger SE 2.4L Starting VIN: 1B3LC46K08
This avenger wont crank its a 2008 so it uses a TICM with no starter relay, and when you turn the key it makes no sound the radio/clock goes dark like the computer is trying to start it but all you here is crickets. I checked battery voltage all seems normal. ...
|1998 Jeep Cherokee Sport 4.0L Poor Idle Quality, Surge, Misfire VIN: 1J4FN28S3W
Got another good one driving me crazy. This is a RHD cherokee for the mail lady. I have tried a few things listed as found in tech help but no fix yet. Starts and runs good until it goes to closed loop, then it surges/misfire at idle, give it gas it will somet...
Fixes & Summaries for Chrysler
|2000 Dodge Ram 1500 Truck 5.9L oil pressure
most said this : engine was so sludged up that the oil would collect under the valve covers because the pump would pump the oil faster than the oil could run though the holes in the heads in returning to the pan. draind some oil and added kerosen (sp?) ran ...
|2001 Dodge Ram 3500 Truck 5.9L Oil VIN: 1B7MC33631
Thank you for your input. It was the pushrod cover gasket on the side of the block.It was hidden behind a shield which blocked our view until teardown. At that time we found the gasket was blown out inthree places.