Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for January 7, 2011
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2005 Chrysler Town & Country (Van) LX 3.8L blower motor VIN: 2C8GP64L95
front blower motor inop. at all speeds; 12 volts on both blower motor leads with key on; fan speed control does not affect voltage reading on either wire to fan motor; lights around fan switch indicating low or high speeds do work; front blower control module?...
View
2002 Dodge Ram 3500 Truck 5.9L Electronic VIN: 3B7MF33682
This is my bosses truck so I need to fix it! Light throttle cruise going up a slight grade it kicks in and out of lock up. I can see on the scanner that it is being commanded on and off as it happens. I scoped the TPS and Map while its occuring cant see any pr...
View
1999 Jeep Grand Cherokee Laredo 4.0L Air bags VIN: 1J4GW58S53
This car came in with the SRS MIL intermittently going on or off. Using a Launch scanner, the following faults were pulled. The are not numbered except by the scanner in sequence: 1. ROM failure. 2. Driver squib circuit #1 shorted. 3. Passenger squib circuit c...
View
2002 Jeep Liberty Sport 3.7L heater box VIN: 1J4GL48K62
thanks ahead , any help at all will be greatly appreciated!this vehicle blows cool air when fan is turned on any setting except off ,then you can feel heat just radiating from the ducts . as soon as you turn the fan up the air goes cool. the door actutor is wo...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
2005 Chrysler 300 (Car) 2.7L Stall, MIL Lamp on, no power VIN: 2C3JA53G65
after testing connectors again, having dealer reprogram throttle body again, they told us it was defective, was exchanged, same problem--installed new pcm, programed all is well. thank you to all that had input Trouble codes: P2110, P2112.
12
1996 Jeep Grand Cherokee Laredo 4.0L No Start, Cuts out, Stall, MIL Lamp on VIN: 1J4GZ58S0T
THANK YOU VERY MUCH FOR THE 9 REPLIES I RECEIVED, I WILL CLOSE THIS REQUEST, HOWEVER, IT IS STILL NOT FIXED, ORDERED A NEW ECM, PHONED CHRYSLER AND THEY TOLD ME THEY HAD 12 ON BACK ORDER, I AM SURE THIS WILL DO THE TRICK. THANKS AGAIN STEVE Trouble codes: P0351.
10
2006 Jeep Commander (Truck) 4.7L Transfer Case VIN: 1J8HG582X6
REPLACED CLUTCHES AND SHIFT MOTOR. REFILLED WITH NEW FLUID. TEST DROVE WORKED GREAT. NOT AS MUCH WEAR ON CLUTCHES AS I EXPECTED, BUT I COULD NOT JUSTIFY NOT REPLACING THEM WHEN I WAS ALREADY THERE. SUSPECT SHIFT MOTOR WAS WEAK NOT APPLYING ENOUGH FORCE TO CLUT...
5
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next