Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for November 17, 2010
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2001 Chrysler Sebring LXi 3.0L Mechanical VIN: 4C3AG52H61
Towed vehicle off road. Quit at highway speed. Check transmissoin codes and fluid. Found no fluid pressure and no fluid flow through cooler. Cleared codes and did not return. Suspect oil pump. Looking for information before i remove transmission from vehicle.
View
1997 Dodge Ram 2500 Truck 5.9L Cruise control VIN: 3B7KC23DXV
Cruise is inop on this diesel truck. The abs & brake light is on. It is a 2 wheel abs system. The speedo does work. I checked the common broken vac hose under battery tray and it's good. The vac pump is producing good vacuum. The cruise will work in 5th gear a...
View
1999 Dodge Ram 1500 Truck 5.2L Convertor VIN: 1B7HC16Y7X
This truck seems as if it is downshifting while the TCC is still kicked in. Upshifts seem to be a bit off (higher than expected) for the speed and load. Downshifts seem to be delayed to a lower speed than expected. This is erratic, but when it happens there is...
View
2000 Dodge Caravan 3.3L noisy VIN: 2B4GP45G5Y
We started thinking it was a transmisison noise---decided to do a lil digging on the engine side looking for a reason--nothing found in the belt area---removed the timing cover and repalced chain..since we went all that way..no change-- loud noise at start up ...
View
2002 Dodge Ram 2500 Truck 5.9L Stall VIN: 3B7KF23602
Hi everyone, hopefully there is some diesel techs out there that can figure this out. This is my own personal truck & I don't work on diesel's very often other than maintenance. Here's my story: Recently the truck started stalling, mainly when I had the fuel ...
View
2004 Dodge Ram 1500 Truck SLT 5.7L Poor Idle Quality, Stall, MIL Lamp on VIN: 1D3HA14J19
hi all,wondering if anyone out there has run into this before. this ram truck will not stay running. as stated,has codes for both cam and crank sensors,replaced both sensors with no change. truck cam in 3 quarts low on oil and has been 7,000mi. since last oil ... Trouble codes: P0335 (crank sensor fault), P0340 (cam sensor fault)
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
1996 Chrysler Town & Country (Van) 3.3L No Start VIN: 1C4GP55ROT
IVERIFYED ALL MY POWERS AND GROUNDS TO ECM CHECKED ALL WIRES FROM IGNITION COIL TO ECM FOR CONTUNIUTY AND ALL IS WELL.I ORDERED A NEW ECM AND COIL INSTALLEED THEM AND ALL IS WELL.
15
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next