|Prev||Professional Automotive Repair Technical Discussions for July 11, 2010
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2006 Chrysler PT Cruiser 2.4L Engine VIN: B16T227466
Vehicle was towed in for engine noise.Fluid levels full and clean,cut oil filter open no metal . Started up noticed rough idle but quiet, warmed to temp still quiet at idle and 2000 rpm in park, power braked quiet,time for a drive and bang , bang sounds like a...
|1988 Dodge D350 5.9L dana 60 iton ft.axle VIN: 1W34Y2HZ45
hi the truck is before my time need some insight on the ft axle assembly and the ball joints/king pins you can take pry bar put under ft. spindles and raise the spindles 1/2 inch upward is this normal for this set up?the upper ball joints are spring loaded bu...
Fixes & Summaries for Chrysler
|2003 Dodge Ram 2500 Truck 5.9L Steering VIN: 3D7KU28C53
well guys fixed this one.. i took a look at all your replies and i came up with the same things i just wanted to be sure. i check alignment before and after and it was good. it was the gear box. replaced it perform alignment and roadtest perfect no more wander...