 Prev |
Professional Automotive Repair Technical Discussions for July 3, 2010 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for European
| Help Request | Answers | |
| 1994 Mercedes-Benz E320 3.2L Electronic VIN: WDBEA92E4R hi evryone this car came to our shop with kickdowen no working.i checked the wirs,valve and switch . all ok.i found no power came to the kicdowen switch.i jumped wire and test the car ,kickdwen worked fine.i checked the wire from swich to pin 6 (87k)at A/C con... |
View | |
| 1998 Mercedes-Benz SLK230 Kompressor 2.3L MIL Lamp on VIN: ZXCVBNM123 Just wondering if anyone has been able to install a used ECM, This car uses DAS (drive authorization). Used ECM seems to be locked and unable to work with this cars DAS system. Any help would be great ??? The Kompressor is on all the time, grounded through the... |
View |
Fixes & Summaries for European
| Fix/Summary | Answers | |
| 2007 Audi A4 Quattro Cabriolet 2.0L MIL Lamp on VIN: WAUDF48H67 Hey Gang... Thanx for the overwhelming and pronto help. Almost everybody was right on the mark with the pressure regulating valve. Installed a new one and the fuel trims went right to normal. I love this site...10,000 heads are better than one every time.... Trouble codes: P0171 (bank 1 too lean), P0300 (pending...misfire codes), P0306 (pending), P0304 (pending). |
15 | |
| 2003 BMW 530i 3.0L windows, locks, lights, air condition VIN: WBADT63403 Well this one is fixed. Thanks to all that replied and offered their experience with bmw. Stehphen and wade both pointed to ignition switch, which I had tested. several members asked questions to which I replied and didn't hear back from. Steve [...]. as always go... |
8 | |
| 1998 Volkswagen Cabrio 2.0L Poor Idle Quality, MIL Lamp on VIN: 3VWAA81E7W Thank you both very much for your replies. The intake boot wasn't oily inside, but I went ahead and cleaned the MAF anyway. I'm sorry I didn't make myself clearer as far as the throttle body goes. Before I replaced the unit (a VDO rebuild from IMC), I cleaned... Trouble codes: P1582. |
3 |
