 Prev |
Professional Automotive Repair Technical Discussions for June 19, 2010 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for European
| Help Request | Answers | |
| 2003 Audi A4 Quattro 3.0L cam actuator Hello all. I also posted this in technical theory in case this was the wrong forum. Just wanted to verify my thoughts. I have a 03 3.0 audi that had come in with a broken cam gear/actuator center bolt resulting in the bank 1 intake cam to stop rotating while t... |
View | |
| 2005 Mercedes-Benz ML350 3.7L abs VIN: 4JGAB57E35 need help with this one. Long story but car broke down in front of shop with broken front diff . replace diff with used part and reman axelshaft. abs/ esp/ets lite on after. called identifix do inquire about gear ratios etc and was told it should be 3:70 anoth... |
View |
Fixes & Summaries for European
| Fix/Summary | Answers | |
| 1994 Jaguar XJS 4.0L HVAC blower VIN: SAJNX574XR From the replies, I followed a strategy of pulling the fuses, and quickly found that the left blower was not operating at all, and the right blower only operated at one speed. I also learned from the replies that the blower motor is a package of motor & other ... |
7 | |
| 2002 Land Rover Discovery Series II SE 4.0L Stall VIN: SALTW12442 THANK YOU ALL FOR HELPING a new new computer fixed my problem Trouble codes: P1884 (Manufacturers specfic). |
8 | |
| 2006 Land Rover LR3 SE 4.4L Latch VIN: SALAE254X6 THANK YOU DAVID [...]! Only got one response on this one but it saved my life. Enclosed is the message I received: This is a common failure...its a bit tricky to do the first time but not horible. The cable has broken at the latch motor, you will need to r... |
5 | |
| 1995 Mercedes-Benz S320 LWB 3.2L battery VIN: WDBGA32E1S It turns out that this chassis has issues with wireing harness, I believe I have disconnected all possible components and still have a draw. THese was a lot of info sent to help but problem is still there. I have disconnected the radeo, ignition swith, netr... |
11 |
