|Prev||Professional Automotive Repair Technical Discussions for February 28, 2010
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1985 Ford Mustang LX 5.0L Head gaskets VIN: 1FABP26A6F
This car actually has a 351W. The problem I have is that I have to replace the head gaskets. My question is which way do the gaskets go? The reason I ask is this is the second time around. Both gaskets have front stamped on them. (That is where the coolant por...
|1998 Ford Ranger Splash 3.0L abs VIN: 1FTZR15V1X
testing includes hooking up scanner and receiving code c1101, accleration speed fault, i replaced the little black sensor on the drivers frame rail by the fuel filter. cleared all o.b.d.-11 codes, and the very next day a.b.s. light is back on with the same cod...
|2003 Ford Explorer Sport Trac XLS 4.0L MIL Lamp on VIN: 1252124526
Once the PCV collapsed hose elbow was replaced, code P0171 cleared and code P2195 is now present (O2 sensor indicates lean). Trouble codes: P2195 (Lack of HO2S -11 Switch sensor indicates lean)
|2005 Ford F-250 Super Duty XL 5.4L 4x4 low VIN: 1FTSX21575
This thing is a headache, she came to us stuck in four wheel low. After following the Ford process I changed the encoder motor, and all was well for a week. Now it's back, and four of us had a shot at her. Now you park in 2 high and come out and she's stuck in...
Fixes & Summaries for Ford
|1989 Ford F-150 XL 4.9L Misfire VIN: 1FTDF15Y8K
Wow what a overwhelming repsonse. IATN is the best. Everyone who said injectors were right on. The customer decided to replace them all and all is well. Thank you all.
|2005 Ford Mustang GT 4.6L Mechanical VIN: 1ZVFT85H25
Unfortunatley I was not able to go home. I had borrowed the tool from a dealership and only had one day to do the repair. Ended up finially getting it done around 8:30pm. I had to use a washer on top of the valve spring in between the tool to get enough cleara...