|Prev||Professional Automotive Repair Technical Discussions for February 27, 2010
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1999 Chrysler 300M 3.5L No Start VIN: 2C3HE66GXX
Hello to all the great technicians out there! Got this old Chrysler that I need some advice on, please. Please hear me out, as I have found the TSB & archives about the problem I am having on this car and have done all I could without alot of expense or "hope ... Trouble codes: P0700 (transmission fault), P1776 (transmission code unrelated to starting problem), P0171 (running lean upper intake was leaking replaced gaskets no more code)
|2006 Chrysler Town & Country (Van) 3.3L programming VIN: 1A4GP45R86
hey guys, especially you chrysler techs. got a programming issue here. replacing a pcm, an ng-3 pcm.before i started my programming session, i did check for any preparation neccessary before performing ths session. i am using the new j2534 console from the ne...
|2009 Jeep Wrangler Unlimited Rubicon 3.8L tru lock unit
the indicator plunger switch appears to have the system engaged (diff lockers) front and rear. does anybody know of a way to install this switch without causing the lockers to lock short of removing the diff unit. Any and All help would be greatly appreciated.
Fixes & Summaries for Chrysler
|1996 Dodge Neon 2.0L No Start VIN: 2B345EARTS
thanks fellow tech vechile had bad crank sensor and camshaft sensor and installed new connector from dealer thanks guys for your help.
|1996 Dodge Intrepid ES 3.5L Cuts out VIN: 2B3HD56F6T
Regarding the cut-out problem on the Intrepid... When this vehicle came to us, it had spent a long time at the local Chrysler dealer where all of the normal stuff had been checked. New cam and crank sensors, PCM, and wiring in between, redundant power and gr... Trouble codes: 11 (loss of cmp/ckp signal at pcm).
|2002 Dodge Stratus SE 2.4L no shift VIN: 1B3EL46X62
greatly appreciated the help from all who posted replaced tcm set pinion factor and quick learned shifts great thanks to all
|1995 Eagle Talon TSi 2.0L Misfire, MIL Lamp on
we smoke checked for vacuum leaks & found none. After performing a top engine treatment we drove the vehicle 160 miles with several pieces of test equipment attached. The vehicle had what felt like one single misfire on one cylinder while pulling a long hill.... Trouble codes: P0301 (cylinder 1 misfire), P1400 (manifold differential switch).