|
|
1995 Ford F-250 7.3L Poor Idle Quality, Misfire, MIL Lamp on
Thanks in advance everybody. I have a 95 7.3 that has the
rather common p1211 code, but it is NOT due to pressure too
low, it is too high at idle. I can watch my icp at idle, on
startup, stay around 900-1000 psi. Pcm starts out
commanding 14% or so ipr, then b... Trouble codes: p1211 (Icp abovebelow desired). |
View |
|
2004 Ford Expedition 5.4L Rear A/C Heat
Need help form you Ford techs out there. This Expedition is
one nice truck. Only problem is the Rear Heat/ A/C only
blows cold air no heat.
Truck has duel front controls and rear heat A/C controls in
overhead consul and at rear of center consul. Have dropped... |
View |
|
1997 Mercury Sable 3.0L No Start
Fellas this pos is driving me nuts. the vehicle will run
all day off carb cleaner.but won't hit a lick on it's own
gas. I have checked and don't seem to be loosing injection
pulse.I ave good fuel pressure and good spark. I swapped a
set of plugs that just came... |
View |
|
1996 Ford Mustang 3.8L overheats
Unfortunately, my customer does not have the money to complete the repairs at this time. If he has me do the repairs at a later date, I will post what I find to be the repair. I temporarily wired in a switch so he could turn the fan on manually to tide him o... |
11 |
|
2008 Ford Escape 2.3L MIL Lamp on
thank you for all that replied replacing the canister, canister vent and the dust filter worked well I didn't put the updated parts for the vent hose in due to customer cost but i did reroute that hose so no future problems will pop up Trouble codes: p0442 (evap leak). |
3 |
|
Prev
