|Prev||Professional Automotive Repair Technical Discussions for November 14, 2009
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
Fixes & Summaries for Chrysler
|1992 Chrysler LeBaron 3.0L will not shift, cannot communicate with tcm VIN: 1C8L2589J5
Thanks to all who gave advice. I found several different issues. I had a bus + and - open at first, I found chaffed wiring near the TCM at T16 splice. I repaired the wiring but still had bus + open. Performed diagnostic procedure for this and found high re...
|1998 Chrysler Concorde LX 2.7L No Start, Stall, VIN: 2C3HD46R9X
Thanks for all the wonderful replies that You have sent to assist me. Sorry to have taken this lon g to respond and close this request, have been very busy lately. The car's now working properly, had to order all the parts from the USA, none was available here...
|2004 Chrysler Pacifica 3.5L transmission VIN: 2C8GF68464
i believe the power transfer unit is where the noise is generated from but customer has not returned to have the repairs done. thank you for all your replies.
|2005 Chrysler Town & Country (Van) 3.3L Insturment Cluster VIN: 2C4GP44R95
Sorry to say that I'm not sure if this vehicle is fixed or not. Thanks to all who replied. Many suggested replacing parts with no real justification for doing so. Harold and jeff were particularly helpful in talking about problems with the power distribution...
|1997 Plymouth Breeze 2.4L Stall VIN: 1P3EJ46X5V
I received 4 replies to suggest me to check throttle body, EGR, intake shape, TPS and ignition switch. I did it. it works well. I cleaned the idle controller. it's some dirty. I will watch the car to see if it is the problem.