× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for August 27, 2009
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1993 Chrysler Town & Country 3.3L No Start, Cuts out, Stall, MIL Lamp on VIN: 1C4GP54R9V
This T&C will go into theft mode very intermittently. The last time the vehicle went on a 500 mile ride was parked and would not start and stay running after that. It would start then quit because of antitheft shut down of injectors. I found that there was fro... Trouble codes: P1695 (lost communication with bcm)
View
2005 Chrysler Pacifica Touring 3.5L MIL Lamp on VIN: 2C4GM68475
Vehicle came in with code P2096 downstream fuel trim 1/2 lean. Watch o2 sensors and fuel trims all ok. Smoke test cant varify any leaks. Decided to change down stream o2 any way. let customer drive vehicle p2096 came back after about 400 miles. Checked for tsb... Trouble codes: P2096 (Down stream fuel trim 1/2 lean.)
View
2005 Chrysler 300 2.7L rough, lacking power VIN: 2C3JA43R95
Thanks in advance for your help, Chrysler techs. Customer complaint that engine becomes rough and lacks power at highway speed only with cruise control on. Come to a stop and engine smooths out and power picked up again. Customer said this has happened only tw...
View
2003 Dodge Ram 2500 5.9L ignition switch VIN: 3D7KU28C73
truck had hard start problem,customer suspected fuel transfer pump,he replace it.after i changed the batteries i noticed that if while cranking the vehicle,i wiggled the key in the lock cylinder it would start.no codes are present and data looks good.anyone ha...
View
1998 Jeep Grand Cherokee Limited 5.2L module VIN: 1J4GZ88Z9W
Hi everyone I have a jeep that is a pain , this came in with the abs light on all the time m system would not comunicate , I replaced the abs module with a used part , the light proves out now and goes off after 2 seconds , after driving the light comes on , I...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
1996 Jeep Grand Cherokee Limited 4.0L sunroof VIN: 1J4GZ78S8T
very good replies thank you all for pointing me in right direction. it was cables binding in track ordered new cables rear drain tubes were clogged .
5
1998 Jeep Wrangler Sport 4.0L No Start VIN: 1J4FY19S0W
Sorry for the late response. Checked all the power and grounds, disconnected all the sensors, didn't find anything. Finally replaced the pcm and problem solved. Thanks for the help and info. Maybe customer fried it when installed new battery that morning it wo...
29
2003 Jeep Grand Cherokee Laredo 4.0L Stall, MIL Lamp on VIN: 1J4GX48S33
Thanks for the help. The fix was another module. This was partially my fault I think. When I put in the pin originally, the next 2 steps are to enter a country code and then update vin. Our drb is a little out of date and I'm not sure if I missed the last 2 st...
3
2005 Jeep Grand Cherokee Laredo 4.7L Poor Idle Quality, MIL Lamp on VIN: 1JHR48N35C
We got this thing fixed, Pulled the intake off to check the gaskets ok, swapped injectors side to side, started up and the lean concern went to bank 2,replaced 4 injectors and the fuel trim numbers came into normal range on both banks, motor ran smooth at idle... Trouble codes: P0133, P2096, P0300 (Misfire).
10
1998 Plymouth Breeze 2.4L No Start VIN: 1P3EJ46XXW
yes it was the pcm,i guess the short knocked the pcm out,all wires ,fuses,fuse links were fine,thanks to all for the help.now i can fix what it came in for.
4
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next