Prev iATN Members TechHelp for July 20, 2009
Automotive Technical Exchange for the Automotive Repair Professional		 Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2000 Chrysler Town & Country 3.8L MIL Lamp on
need help,this is my wifes van this is the 3rd time these codes have set.i was driving van 2 of the times when light came on absolutely no symptoms no misfires felt.codes set were in this order,p0300 p0306 p0305 p0304 p0303 p0302 p0301 freeze frame data p0300 ... Trouble codes: P0300 (multiple cyl misfire), P0306 (cyl no 6 misfire), P0305 (cyl no 5 misfire), P0304 (cyl no 4 misfire), P0303 (cyl no 3 misfire), P0302 (cyl no 2 misfire).		 View
1991 Dodge Caravan 3.3L Misfire
I have a misfire on #2 and #3 cylinders,no injector pulse.checked the wires no visible damage.we replaced the pcm still have the same problem.Do these vans have problems with the connectors,I have looked at the gray connector at the battery & the pcm do I need...		 View
1997 Dodge Intrepid 3.3L Cuts out, Stall
this car came in to are shop, with a stall when stoping, test drove. notice the rpm would drope to 200-500, ever so often when it droped to 200, it would then die, scaned for codes, only found a code 74 in the transmission. checked the the datastream. are scan... Trouble codes: 74 (Calculated Oil Temperature In Use).		 View
1999 Dodge Grand Caravan 3.8L Gauges, HVAC.
Another Caravan with cluster problems!! I put a Chrysler reman BCM in this last year and soldered the cluster pins. It's back with no speedo, tach, fuel gauge, heater controls, rear wiper plus airbag and abs lights on. No BCM communication on my Modis. I pulle...		 View
2003 Dodge Pickup 5.7L No Start, Poor Idle Quality, Misfire, MIL Lamp on
I have the truck that is giving me a fit. I have 3 scanners, snap-on brick, cheap Auto X-Ray, and OTC Pegysis. Only the Pegysis will communicate (its a dodge). The code that it pulls is P0172 and says it LEAN B1. Im confused about that one. It also will not id... Trouble codes: P0300 (random cylinder misfire), P0172 (system lean bank 1).		 View
2005 Dodge Pickup 4.7L Cooling Systems
Thanks in advance for taking time to help. This truck has been to my shop three times, each time customer states that he is adding 1/2 gallon of coolant a week, which is about 400 miles for him. Every time, we pressure test but find no leaks. The system will l...		 View
2002 Jeep Wrangler 4.0L Airbag
Hi iatn members I could not find any information about this code! I cleared the code it came back right away. Anyone heard of this code before? Need some advice. Thanks		 View
2006 Jeep Liberty 3.7L Cruise Control
When cruise is set, vehicle speeds up until you apply brake or press cancel button. Used Starmobile to actuate/toggle servo vacuum controls (KOEO). All solenoids seem to toggle just fine. Could it be the servo assembly? Not quite sure how system is supposed to...		 View
2001 Plymouth Neon 2.0L Copressor
Have this plymouth neon that will not engauge the compressor clutch. Using my Modis I can see where the computer is telling my scanner that the switch is on but it does not shoe the clutch as being on. It only has one code but I do not beleave that they are re...		 View

Fixes & Summaries for Chrysler
Fix/Summary Answers
2002 Chrysler PT Cruiser 2.4L cooling system
I can't remember which member told me to check cooling fan. I heard it running and both low and high speed check on scanner,but it only had low speed, new elec. fan fixed it. thank you		 11
2003 Chrysler Town & Country 3.3L alternator
majority input is that it is the altenator. I replaced the reman alt. with a new oem. noise has not been heard when vehicle left. price difference between rebuilt and new was not much.		 4
2004 Chrysler Pacifica 3.5L ac
got some good replies that suggest the direction I was going. a broken wire in the fenderwell at the pcm turned out to be the issue. did not have a 5 volt reference at the transducer switch on the high side. keeping system from engaging the clutch on the comp...		 5
1999 Dodge Durango 5.2L Cuts out
I INSTALLED A REMANUFACTURED ECM FROM THE DEALER HAD IT REPROGRAMMED DROVE TRUCK ABOUT 60 MILES AND IT NEVER SHUT DOWN ALL SEEMS FINE .THANKS FOR ALL THE HELP.		 10
2005 Dodge Pickup 5.9L MIL Lamp on
THE CUST DID NOT BELIEVE ME WHEN I SAID THAT THE FUEL PRESHER SENSOR WAS BAD. SO HE TOOK THE TRUCK TO A DEALER AND THEY PUT A FUEL PRESHER SENSOR ON AND THE TRUCK RAN FINE AND THERE WAS NO MORE CODE.THANK YOU FOR ALL YOUR HELP. Trouble codes: PO192 (low volts to fuel sensor).		 4
1997 Jeep Wrangler 4.0L Oil Pressure gauge
This took me several days to confirm but I did. As many of you suggested, that the oil pressure was too low. I took the fan clutch off and let it idle, and got the temp on the engine to reach about 225F. Once this occurred the oil pressure dropped to about 6...		 8
2000 Jeep Grand Cherokee 4.7L fuel gauge
As I stated before we had replaced sender, pump and cluster. Grounds were good and wiring from sender to control module are good. I believe that the signal is getting "lost" on the trip from control module to cluster (if this is even possible but I can't prov...		 4
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next