|Prev||Professional Automotive Repair Technical Discussions for June 21, 2009
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for European
|1997 BMW Z3 Roadster 2.8L hanger bearing VIN: 4USCJ3327V
Checked for bumping sound underneath car. Pulled the exhaust cover place and found the hanger bearing had came apart. I replaced the hanger bearing and I still have a bumping sound. I have replaced the rear diff bushing and both of the carrier bushings. I have...
|1990 Jaguar XJ6 4.0L Poor Idle Quality, Hesitation, Stall, Misfire, would not rev up VIN: SAJDKALD3A
We are stumped by this Jag. It came to us from another workshop who had given up. The engine would start and idle well for a short while and them it would slow and stall. Restarting with one kick. It would them idle for a short while and stall. If you give it ...
|2005 Volkswagen Golf GL 2.0L Poor Idle Quality VIN: WVWZZZ1KZ5
Car came in rough idle, scanned and found two faults egr related (just had new egr valve fitted at exhaust shop) carried out basic setting on egr and throttle body, no more fault codes, fuel trims at -4% ,o2's cycling, perfect above 1/4 throttle, any ideas?? I...
Fixes & Summaries for European
|1995 BMW 320i 2.0L Cuts out VIN: E36320IBMW
Thanx Guys for all your help. The vehicle did have air leaks and dodgey hoses but all did not fix the problem. So I replaced the DME and all is good now and runs like a clock. Thanx again Regards Lloyd A.
|1995 Mercedes-Benz SL320 3.2L Rear Clicking VIN: WDBFA63E9S
Hello everyone and tahnks for the help on this one. As suggested, the CV joints get dry. We removed the large joint clams and pulled the boots back and worked grease back into the joints. We also replaced the diff control arm/bushings and all is good. Than...
|2001 Mercedes-Benz E320 3.2L signal light VIN: WDBJF65J21
Hi everybody. First, thanks to Sleinman [...] for giving me, some technical information about the circuit opera...
|1966 Volkswagen dune buggy 50CID no idle at times
special thanks to dan & julian but thanks to all who gave me what i needed to check or confirm what i had done in past.this pain in the as- has been awhile. i took the carb.apart to reclean again as hoping to find that little passage i missed a dozen times bef...
|2003 Volkswagen Passat GLS 1.8L ABS Module VIN: WVWVD63B13
Well this one is fixed..it turned out that I had to replace the whole hydraulic unit with the module not just the module. Maybe one of the valves was hanging up and kept setting the code for the supply voltage. Anyhow thanks to those that responded this one i...