|Prev||Professional Automotive Repair Technical Discussions for June 5, 2009
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2002 Chrysler Town & Country (Van) LXi 3.8L Poor Idle Quality, Misfire VIN: 2C8GP54L72
vehicle came in for 90k service. unfortunately, we're not sure weither or not the vehicle had the problem before we serviced it, but regardless, cylinder #1 has a misfire. we originally put plugs and wires from the 90k service and then had noticed it. went bac...
|2003 Dodge Neon SXT 2.0L compressor VIN: 1B3ES56C33
Hi IATN, I have an 03 Neon with no compressor engagement. After testing at the relay I found there was no signal from the PCM. A/C has plenty freon and tested compressor circuit from the relay and that works fine. I have jumped the high and low pressure switch...
|2002 Jeep Liberty Renegade 3.7L Poor Idle Quality, Misfire VIN: 1J4GL38K22
missfire with no codes and missfire counter passes. found right bank has no injector pulse. 2,4,6. 1,3,5, are fine. flow chart sugjests the PCM, replaced PCM with no change, re-installed old PCM. checked key on power lead with good 12v on all injectors. PCM is...
Fixes & Summaries for Chrysler
|2000 Dodge Durango 4.7L compression VIN: 1B4HS8N5YF
OK, ladies and gentlemen, we have a fixed vehicle and a happy customer thanks to all of your help! It seems there was two seperate issues, first we tried a different position with the drivers side cam, which greatly improved idle and power, but it was still no...
|1994 Jeep Grand Cherokee Laredo 4.0L No Start, Stall VIN: 1J4GZ58S0R
Thanks for all the help. The signal was good from the Crank and cam sensors when running or not. When the problem occured the signals were good, according to the lab scope. when I checked with the scan tool I was losing the RPM signal. I was sure it was the Cr... Trouble codes: 54 (No CAM sync signal at PCM), 11 (No Crank reference at PCM).