|Prev||Professional Automotive Repair Technical Discussions for November 2, 2008
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2004 Chrysler PT Cruiser Touring 2.4L MIL Lamp on VIN: 3C8FY58814
Please any suggestions, I have checked the check valves and they all perform as designed. Help. Trouble codes: P0234, P1188
|1995 Dodge Ram 2500 Truck 5.9L AC comp, O/D sw. VIN: 1B7KF26C4S
Owner complains tachometer, a/c compressor, and o/d switch aren't working. I disconnected the PCM connector and inspected the pins on the harness and on the PCM, and checked the harness with an ohm meter. when I reassembled the harness to the PCM, all function...
|2001 Dodge Ram 2500 Van 5.2L No Start VIN: 2B7JB21Z61
I have been working on this truck for 3 years 4/05. same problem. originally came in no start no spark replaced coil started and ran for 30 to 60 days after. Would replace the coil with restart 4- 5 times after words, over a period of 2 years. finally wouldnt ...
Fixes & Summaries for Chrysler
|2005 Dodge Grand Caravan SXT 3.8L power steering VIN: 1B45C76R34
Russ nailed it and got me thinking on this one. It only did this after a higher RPM and then a coast at low RPM. Flow contol valve stuck all the way back in its bore and then slowly returning. I removed the pump and found that it would stick when pushed into b...
|2000 Jeep Grand Cherokee Limited 4.7L blend door VIN: 1J4GW58N2Y
Hello, Thanks for all the replies! Chip [...] hit it right on the head. You have to lay on your back on the drivers side and you can see a bolt holding the frame. Thanks a lot Chip and all others too.