Prev iATN Members TechHelp for October 8, 2008
Automotive Technical Exchange for the Automotive Repair Professional
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2002 Chrysler Sebring 2.7L valve seals
This customer did not pass emmessions for visable smoke. It is smoking blue a bit on acceleration. I am wondering if this chrysle/mitsubishi has a history of valve seal problems? Any info about tsb's would be great, I did not find any on the mitchell. Has anyo...
View
2004 Chrysler Pacifica 3.5L Differential
Having a problem with this vehicle, that I only got it to happen once... When driving in reverse on a slight incline the rear tires just spin, I am leaning more to a trans problem, but I can't duplicate enough to test and verify. Any help on this issue would b...
View
1992 Dodge Stealth 3.0L Hard start
Thanks in advance to anyone reading or replying to this post. What I have here is a Stealth that at present will not prime up the fuel pump on KOEO. tested MPI relay and found White/Red pin 66 of control unit not latching relay on KOEO. ( you can ground...
View
2002 Dodge Dakota 3.9L Poor Idle Quality, Cuts out, Stall
Help Dodge techs.I'm a 22.yr GM fuel/electrical guy and have just moved into new job as college auto instructor.Have a very intermittent Dodge that another instructor owns and runs great for me on every road test.Appearantly it will cut out,pop under hood,almo...
View
2003 Dodge Sprinter 2500 2.7L Hesitation, Lack of power
This vehicle will not go above 1800 RPMs at times. I thought it was an EGR valve problem. It seems to go into a default mode. So I replaced the EGR valve. $700 + . The problem seems to come and go at will. One day it acts up bad. The next It runs perfect for 2...
View
2005 Dodge Magnum 5.7L Noise
hi guys bit of a troublesum noise coming from rear left of vehicle but noise sounds up high almost in shock area of floor we have replaced rear shocks and mounts which are really not mounts like struts would have all bushings, arms ,stab links etc all seem fin...
View
2005 Dodge Durango 5.7L integrated power mod
The integrated power module is dropping the voltage to the fuel pump. My question is, will bypassing the module by connecting the wire (db/or)from the fuel pump relay to wire (db/or) to the fuel pump cause any other problem? I connected them together and it st...
View
1997 Jeep Grand Cherokee 5.2L Hesitation, Poor Fuel Economy, spar k knock
After i had all new exhaust installed, along with both new o2 sensors installed, the convertor code came back,along with spark knock on accel. So i did a full tune up. Plugs,wires,cap,rotor, o.e.pvc valve and fuel filter. I also check for vac leaks,fixed a cou... Trouble codes: p0420.
View
2000 Jeep Grand Cherokee 4.0L convertor
Hello, I'm a transmission rebuilder who recently who is in search of help. Customer's 2000 jeep grand cherokee laredo, (trans:a500/42re Eng:4.0 I6) which we rebuilt the transmission aprox. 22,000 miles ago, recently came back with a torque converter cycling on...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
1996 Chrysler Sebring 2.5L Starting
i still have a problem but i got it started and running now after running for about an hour it stalls and starts but doesn't run right no power, i let it sit to cool and it starts and runs fine. back to the fix ,i had a code for tps volts to low when i would ...
17
1973 Dodge dart 225CID No Start
Thank you for all that responded,after hours of work and replacing many parts found out the negative wire from coil was shorting out to ground (intermitantly).Love this business!
26
1997 Jeep Wrangler 2.5L Starting
Thanks David and Benjamin [...] Your Help. It Was A Bad Ign. Switch.Thank You David [...] Finding It In AllData. You Guys Are Great.
2
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next