|
1993 Honda Accord 2.2L Compressor
Hi all Did a condenser replacement on vehicle.rechecked
for leaks and found none.The condenser was rusted out and
the system had been previously converted to r134a years ago
and had been working well until over the winter. Now have
concern of compressor cyling... |
View |
|
2000 Kia Sportage 2.0L lack of acceleration
Vehicle had p1115 water temp and p1624 code in TCM. Also
had a bank 1 sensor 2 o2 code. Unable to retrive code from
tcm but is probably a water temp code. Vehicle has a lack
of power on take off but accels good on a forced downshift.
Vehicle also intermittentl... Trouble codes: p1115 (Water temp malfunction), p1624 (code stored in tcm). |
View |
|
1997 Mazda MPV 3.0L Ignition timing
The vehicle ignition timing is about 30 degrees BTDC. We
try to adjust the timing moving the distributor with out
any results .We also try jumping the distributor one tooth
forward , and after that one tooth backward , trying to see
if we can have the timing o... |
View |
|
1999 Mazda Miata 1.8L Steering
First time customer to us. The car has torque steer to the
right when accelerating. He said he had it aligned but we
checked it ourselves and the readings are correct. We found
no loose or worn out parts in the front or rear suspension.
The struts are OE but n... |
View |
|
2000 Nissan Sentra 1.8L MIL Lamp on
Any help would be appreciated. This car came originaly
with PO335 sent to the dealer for recal. They replace
sensor and sent away after first trip the light came back
on. Back to the dealer they had car for 3 days and could
not find a problem they keep telling... Trouble codes: P0335 (crank sensor A circuit). |
View |
|
2000 Subaru Outback 2.5L Poor Idle Quality, Surge
vehicle randomly idles high (1400 rpm) with no accessories
on. Throttle body and iac motor have been cleaned, no
change. usually happens after it has reached operating
temp. Lt fuel trims were at -24 before a/f sensor
replacement. fuel trims are now -10 after ... |
View |
|
2001 Toyota Echo 1.5L Poor Idle Quality, Stall, Misfire
Found tsb on code and followed instructions. We did
actuator test and engine stalled, checked actuator and
connections ect. Bulletin said if everything tested okay
replace cam gear with updated cam gear which we did.
Followed instructions of tsb and timing cha... Trouble codes: P0-1349. |
View |
Prev
