P0335 Diagnostic Trouble Code Discussion for July 2008
Crankshaft Position Sensor Circuit Malfunction
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0335
| Help Request | Posted | |
| 2004 Nissan Titan LE 5.6L Surge, Poor Fuel Economy, MIL Lamp on VIN: 1N6AA07B44 P0335: Crankshaft position sensor circuit. Absolutely ODD! Truck is setting a P0335 Crankshaft position sensor code, comes in cranks no start. So we got a 3 wire hall type sensor, a ground supply, 12 volt power supply from ECM relay, and a output signal generated squarewave to the ECM. Simple tests sho... |
July 07, 2008 | |
| 2004 Hyundai Sonata 2.4L No Start, MIL Lamp on VIN: KMHWF25S34 P0335: Crankshaft Position Sensor 'A' Circuit Malfunction. ... hands.This Sonata came in on the hook with a no start condition.Found that it had no spark or injector pulse.Decided since a stored code of P0335 crankshaft position sensor cicuit fault. Since that seems to be a common problem,and found that the sensor has... |
July 10, 2008 | |
| 2000 Nissan Sentra GXE 1.8L MIL Lamp on VIN: 3N1CB51D5Y P0335: Crankshaft Position Sensor Circuit Malfunction. Any help would be appreciated. This car came originaly with PO335 sent to the dealer for recal. They replace sensor and sent away after first trip the light came back on. Back to the dealer they had car for 3 days and could not find a problem they keep telling... |
July 12, 2008 | |
| 2004 Dodge Ram 3500 ST 5.9L MIL Lamp on VIN: 3D7LU38C14 P0335: ckp sensor ckt. Thanks for the help in advance. I have this dodge diesel here that had the check engine light on found the codes for the ckp sensor. On visual inspection found the serp belt was coming apart and ckp sensor had been chewed up. ordered belt and sensor from dodge... |
July 15, 2008 | |
| 2004 Nissan Titan LE 5.6L Surge, Poor Fuel Economy, MIL Lamp on VIN: 1N6AA07B44 P0335: Crankshaft position sensor circuit. Absolutely ODD! Truck is setting a P0335 Crankshaft position sensor code, comes in cranks no start. So we got a 3 wire hall type sensor, a ground supply, 12 volt power supply from ECM relay, and a output signal generated squarewave to the ECM. Simple tests sho... |
July 22, 2008 |
