|Prev||Professional Automotive Repair Technical Discussions for March 9, 2008
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1994 Chrysler LHS 3.5L wipers inoperative VIN: 1G49274A9R
First the v.i.n. is made up, sorry for that. I have an L.H.S. that has no wiper function other than washer, a.t.c. panel blank and blower running at low or mediun with key on and hazards do not work. The a.t.c. panel has been dark for almost a year, the other ...
|1988 Dodge Shadow 2.2L master cylinder VIN: 1B3CS48D3J
I need help from a good Dodge tech. I am a Toyota man myself and this problem has me stumped. This is my own car unfortunately. Problems started with the right front caliper binding up and not releasing. Cracked open the brake line (bleeder is frozen) and cali...
|1995 Dodge Stratus ES 2.5L power assist VIN: IC3EJ56H4S
the problem with this car is that when turning left, there seems to be little or no power assist, turning right is fine. checked all ball joint and tie rods, tried unplugging the various sensors on the rack, no change, my next test was to check p/s pump pressu...
|1998 Dodge Ram 2500 Truck 5.9L No Start VIN: 3B7KF2265W
ORIGINAL-Crank and no start,turn off ignition switch and retry,then engine starts/runs/no smoke.This happens every time hot or cold. We are loosing voltage to lift pump and wait to start lamp. Replaced ignition switch.Inspected wires to connections. Tested lif...
Fixes & Summaries for Chrysler