|Prev||Professional Automotive Repair Technical Discussions for December 8, 2007
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1993 Dodge Intrepid 3.3L No Start VIN: 2B3ED46T9P
Hello all This car towed in crank no start . no spark or injector pulse. mitchell says code 11 is no crank sensor signal. so I replace crank and cam sensors, now it has spark and injector pulse but still wont start. it acts like the timings off, bucks starter ... Trouble codes: 11 (no crank sensor signal)
|1993 Dodge Caravan 3.3L Hesitation VIN: 45VXAO2BOP
This my first post for help I am working on an aeromate utilty truck that has 3.3 caravan powertrain I replaced flywheel and crank sensor 20,000 miles ago was hesitating badly due to cracked flywheel it is back again with same problem and i verified flywheel i...
|1996 Eagle Talon ESi 2.0L No Start VIN: 4E3AK44Y4T
Hello everyone, this vehicle came to me as a basket case. Several other people and shops have been here before me. This cear has had more than one pcm installed from what I understand from previous people who have worked on it.The first one was installed incor...
Fixes & Summaries for Chrysler
|1999 Dodge Durango SLT 5.2L Poor Idle Quality, Surge, Cuts out, Stall, Misfire VIN: 1B4HS28Y9X
hi thanks for your help , this dodge drove us nuts . the fix was the crank sensor ,at the other repair shop had replace is with after market , hope this will help someone when timing changes it will change fuel .