Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for December 7, 2007
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2003 Dodge Sprinter 2500 2.7L No Start VIN: WD2YD74233
WOW!!! I have a Sprinter that will not start cold. Had no problem all summer. Customer said it would not start last winter unless he shot it with the juice or kept it in his garage. He wanted a block heater installed, dropped it off and picked up the same afte...
1997 Jeep Cherokee Sport 4.0L unknown VIN: 1J7KF26Z7V
OK guys. I have one I can not solve. This Cherokee has a ridiculously loud "belt squeal" noise under hood. I ofcourse have checked tensioner and idler pulleys. I hate to admit it, but this had turned into a parts change rally. I loaded the charging system and ...

Fixes & Summaries for Chrysler
Fix/Summary Answers
1996 Chrysler Cirrus LX 2.5L No Start VIN: 1C3FJ56H1T
Thanks for everyones help and input. We tried everything, that you guys mentioned and more, turns out it was a case of shoddy parts. The third crank sensor and second distributor we finally got it running. Two GP crank sensor in a row were bad, replaced with C...
2001 Chrysler Intrepid 2.7L power steering VIN: 2C3HH46RO1
thanks for all the help fix was oring nicked at base of p\steering resivor. We pressurized the res. It took 75psi to get a slight seepage at base. Pulled the tank back off and replaced o-ring all ok now. thanks again
2002 Chrysler Town & Country (Van) EX 3.8L pump VIN: 2C8GP74L92
Well, I am pretty sure that its fixed. Only will really know when customer lets me know. Again, this was an intermittent noise and moreso cold. As the majority of you suggested, I replaced the reservoir and flushed and refilled with ATF+4. After repairs, it di...
1996 Dodge Intrepid ES 3.5L Misfire, MIL Lamp on VIN: 2B3HD56F6T
Thankyou one and all. What a wealth of information.Reading these posts will help anyone better understand fuel trim and o2 parameters, lean and rich.My readings were telling me vacumn leak.Found the two piece EGR tube loose.Repaired the leak.Scan readings much... Trouble codes: 300 (Multible misfire).
2000 Dodge Ram 2500 Truck 8.0L Truck VIN: 1B7KF23W3Y
I guess you can call this one fixed. I gave the customer the diffrent opptions of what it could be and how to investigate it. He opted for a can of leak stop and a trip to the nearest new truck dealer to trade it in. Thanks for the advice.
2001 Dodge Ram 3500 Truck 5.9L No Start, Poor Idle Quality, MIL Lamp on VIN: 3B6MF36771
thanks, a lot you were all correct. the injection pump was toast. got a reman unit from dodge and all is well. did take about 4 hrs (per dennis) i didn't have a small enough puller so i had to modify one, which took some extra time but got me out of a jam. ... Trouble codes: P0216 (p0230-), P0230 (p0251-), P0251, P0252, P1688, P1689.
2001 Dodge Ram 1500 Truck 5.9L No Start VIN: 1B7HF13Z21
Great News! This truck is fixed and running strong on the Jasper engine. The problem was that when we installed the distributor we lined the rotor up exactly with number one on the cap with the engine at TDC which is almost right but not quite. There is an ind...
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next