|Prev||Professional Automotive Repair Technical Discussions for June 23, 2007
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1995 Ford Contour GL 2.0L Poor Idle Quality, Cuts out, Stall VIN: 1FALP6534S
this one has me a little baffled guys but i havnt had alot of time to spend on it. the car was brought in from another shop who did a tune up plugs,wires,air filter, timing belt. and they also replaced the computer with no fix. customer got fed up and brought ...
|2000 Ford F-150 Lariat 5.4L All eletric items cut off VIN: 1FTRX18LXY
I have a one time failure of electrical system truck shut down while driving down road lost all electrical power pulled over restarted truck drove over 100 miles no problems since one time faliure. I have not duplicated concern. any advice would be greatly app...
|2000 Ford Mustang 3.8L engine VIN: 1FAFP4041Y
engine has a very slight knocking noise on right rear of engine mostly heard from engine compartment doesnt sound like rod or wrist pin sounds moore like rubber mallet on plastic. it does increase with eng speed. this engine has the aluminum intake and plenum....
|2002 Ford F-350 Super Duty XL 7.3L power lose VIN: 1F4AX3DAFU
Hi All, I've got one giving me a problem, This truck came in with a bad roll at idle with IPR valve duty cycle around 7%. Checked the fuel system and found an aftermarket fuel pump suppling 75 psi. This thing ran on vegetable oil for ablut a year also. We bypa... Trouble codes: P1211 (ICP Higher or lower than expected)
Fixes & Summaries for Ford